Foton Resa pump truck adopts the new ISG engine Caitong dry and wet cylinder liner design to reduce the oxidation of oil and the small size. With NanoNetTM patented technology, the efficiency of fuel filtration and impurity filtration is as high as 97%, and the water separation effect is improved by 99%.Patented oil slow-release agent, which slows down oil acidification and reduces oxidation.
The engine is the heart of the car, providing power for the car to walk. The car is dynamic, economical and environmentally friendly. Simply put, the engine is an energy conversion mechanism, that is, the thermal energy of gasoline (diesel) is converted into mechanical energy by burning gas in a sealed cylinder, which is the most basic principle of the engine.
Platinkins engine is generally good. Relatively durable. When you buy a car, you must asquire the seller for instructions for the use of the vehicle and engine. Do it according to the manufacturer's requirements. Even if there is a problem, the manufacturer's after-sales service will solve it.
The engine oil and gear oil used need to be Foton five-star special oil, because the special oil can play a lubricating role, which is crucial to the maintenance of the engine.Non-special oil may make it difficult to rotate the inside of the engine, thus damaging the engine.
General engine maintenance includes the following aspects: 1. Replace the oil in time. Once the oil turns black, becomes thinner and contains sand, it should be stopped immediately. If the oil is not changed for a long time or the deteriorated oil is not used, it will not only fail to lubricate but also damage the engine.
Basically, it is maintained 3 times a year less than other pump trucks, and the maintenance cost saved is about 10,000 yuan. In terms of fuel consumption, the Resa pump engine automatically adapts to the pumping load, which can save 20% of energy. In addition, the fuel consumption of the car wash can also be reduced by 50%, which can save 50,000 yuan a year compared with other cars.
1. The engine model of Guoliu Automobile is 7NR. This engine is a 5L naturally aspirated engine with a maximum power of 81KW and a maximum torque of 138NM.
2. Add 5w30 engine oil to the national six cars. Specifically for the engine, 8 naturally aspirated engine, only original mineral oil can be used, or Huang Xili HX5, Jin Jiahu, etc.
3. SAIC Power E series engine adopts a combination of 10L and 12L gold large displacement, with a maximum torque of up to 2200N.m, which can burst out strong power, and the maximum burst pressure reaches 19MPa. The powerful technical support can make fuel burn more fully. The injection pressure of 200MPa The force makes the fuel atomization effect better.
4. The biggest feature of a naturally aspirated engine is smooth, stable, reliable and worry-free.Because the naturally aspirated engine has been developed for a long time, the internal structure is relatively simple, and the technology is relatively more mature, it is very worry-free to use in the later stage. As long as the car is maintained normally and the car is used in a standardized manner, the naturally aspirated engine can be used until the car is scrapped.
5. The difference is that the engine of the national six vehicle uses a ternary catalyst, and its performance will be better than that of the national five vehicle. There is no big difference in the power data between many countries 5 and countries 6, but there is a very big difference in the engine. The difference between engines is that hardware and software have changed.
The engines of Highlander 5 and Lexus 5 are the same, and both use Toyota's V6 2GR-FE engine. This engine has good fuel economy, and the power output is relatively smooth and has less jitter. It won the title of the top ten engines in 2007.
The engines of Highlander 5 and Lexus 5 are Toyota's V6 2GR-FE engines.The engine has good fuel economy, stable power output and small jitter, and won the title of Top Ten Engines in 2007. The maximum horsepower of the engine is 273, the maximum power is 201kw, and the maximum torque is 337N·m.
The engine of Highlander 5 and Lexus 5 is the same, using the Toyota V62GR-FE engine. This engine has good fuel economy, stable power output and small jitter, and won the title of the top ten engines of 2007. The engine has a maximum horsepower of 273 horsepower, a maximum power of 201kw and a maximum torque of 337N·m.
1. Large-disposture hydraulic system: Reduce the damping of the hydraulic system by selecting valve blocks and pipeline components with large flow diameter, reduce system heating, and achieve energy-saving effect.
2. First of all, increase the air intake by smoothing and expanding the intake and exhaust channel, increasing the cross-section of the engine valve, improving the compression ratio, changing the opening and closing time of the valve, etc. Secondly, the technical debugging of the intake and exhaust system can be carried out, and even the compressor system can be replaced.
3. Super energy-saving: engine adaptive pumping load energy-saving technology; idling car wash energy-saving technology, power system fuel saving; fuel consumption saving 50,000 yuan/year; whole vehicle matching fuel saving.
4. Maximum power refers to the maximum change in the energy of the circuit component in a unit time of the power supply, which is a physical quantity with size and positive and negative. It specifically refers to the maximum output power here.
5. The water pump needs to have the function of cooling the pump itself during the operation of the pump; the oil pump needs to be able to easily find and solve faults, and often requires self-detection, power-off, protection and other functions. There is also a big difference between the operation mode of the water pump and the oil pump.
Resa L9 crane adopts integrated manufacturing technology and is highly reliable: the factory is built with German technology level, and the engine and chassis research and development and manufacturing are integrated. High-quality products come from Sino-German advanced technology, and the integrated quality ensures reliable manufacturing.
Comparing quality, performance, price, etc., it seems that Resa is better, and Resa heavy machinery is increasingly recognized by industry insiders.Foton Resa Heavy Machinery is a global technology integrated company of Foton Automobile, using integrated research and development, integrated design, integrated manufacturing and integrated service system.
Resa Heavy Machinery adopts a large number of imported testing equipment and adopts the German quality management control system. In addition to meeting the national testing standards, crane products also adopt German testing standards. The driving performance, operation performance and structural strength of cranes have been tested, and the product quality reaches Made in Germany.
1. Very good. The pump truck of Foton Resa is independently developed and manufactured. His pump truck is created with advanced German technology, and has its own special Oman chassis with good technical performance. It uses the American Cummins engine, which has good power performance and is powerful and fuel-saving.
2. Resa is not bad. Zhucheng has built the top intelligent manufacturing base in China for Foton Resa, adopting standard box intelligent manufacturing and advanced innovation-driven technology. The Zhucheng Resa project has achieved the industry's first original box top loading, which maximizes the reliability and matching of the product.
3. Anqing Futian Resa has good R&D treatment. Perfect salary system: Anqing Foton Resa's research and development includes basic salary, performance salary and year-end bonus. Perfect salary adjustment mechanism: Anqing Futian Resa R&D has a salary adjustment at least once a year.
Resa L10 Guoliu vehicle pump, what engine does it use?Trade data-driven market penetration-APP, download it now, new users will receive a novice gift pack.
Foton Resa pump truck adopts the new ISG engine Caitong dry and wet cylinder liner design to reduce the oxidation of oil and the small size. With NanoNetTM patented technology, the efficiency of fuel filtration and impurity filtration is as high as 97%, and the water separation effect is improved by 99%.Patented oil slow-release agent, which slows down oil acidification and reduces oxidation.
The engine is the heart of the car, providing power for the car to walk. The car is dynamic, economical and environmentally friendly. Simply put, the engine is an energy conversion mechanism, that is, the thermal energy of gasoline (diesel) is converted into mechanical energy by burning gas in a sealed cylinder, which is the most basic principle of the engine.
Platinkins engine is generally good. Relatively durable. When you buy a car, you must asquire the seller for instructions for the use of the vehicle and engine. Do it according to the manufacturer's requirements. Even if there is a problem, the manufacturer's after-sales service will solve it.
The engine oil and gear oil used need to be Foton five-star special oil, because the special oil can play a lubricating role, which is crucial to the maintenance of the engine.Non-special oil may make it difficult to rotate the inside of the engine, thus damaging the engine.
General engine maintenance includes the following aspects: 1. Replace the oil in time. Once the oil turns black, becomes thinner and contains sand, it should be stopped immediately. If the oil is not changed for a long time or the deteriorated oil is not used, it will not only fail to lubricate but also damage the engine.
Basically, it is maintained 3 times a year less than other pump trucks, and the maintenance cost saved is about 10,000 yuan. In terms of fuel consumption, the Resa pump engine automatically adapts to the pumping load, which can save 20% of energy. In addition, the fuel consumption of the car wash can also be reduced by 50%, which can save 50,000 yuan a year compared with other cars.
1. The engine model of Guoliu Automobile is 7NR. This engine is a 5L naturally aspirated engine with a maximum power of 81KW and a maximum torque of 138NM.
2. Add 5w30 engine oil to the national six cars. Specifically for the engine, 8 naturally aspirated engine, only original mineral oil can be used, or Huang Xili HX5, Jin Jiahu, etc.
3. SAIC Power E series engine adopts a combination of 10L and 12L gold large displacement, with a maximum torque of up to 2200N.m, which can burst out strong power, and the maximum burst pressure reaches 19MPa. The powerful technical support can make fuel burn more fully. The injection pressure of 200MPa The force makes the fuel atomization effect better.
4. The biggest feature of a naturally aspirated engine is smooth, stable, reliable and worry-free.Because the naturally aspirated engine has been developed for a long time, the internal structure is relatively simple, and the technology is relatively more mature, it is very worry-free to use in the later stage. As long as the car is maintained normally and the car is used in a standardized manner, the naturally aspirated engine can be used until the car is scrapped.
5. The difference is that the engine of the national six vehicle uses a ternary catalyst, and its performance will be better than that of the national five vehicle. There is no big difference in the power data between many countries 5 and countries 6, but there is a very big difference in the engine. The difference between engines is that hardware and software have changed.
The engines of Highlander 5 and Lexus 5 are the same, and both use Toyota's V6 2GR-FE engine. This engine has good fuel economy, and the power output is relatively smooth and has less jitter. It won the title of the top ten engines in 2007.
The engines of Highlander 5 and Lexus 5 are Toyota's V6 2GR-FE engines.The engine has good fuel economy, stable power output and small jitter, and won the title of Top Ten Engines in 2007. The maximum horsepower of the engine is 273, the maximum power is 201kw, and the maximum torque is 337N·m.
The engine of Highlander 5 and Lexus 5 is the same, using the Toyota V62GR-FE engine. This engine has good fuel economy, stable power output and small jitter, and won the title of the top ten engines of 2007. The engine has a maximum horsepower of 273 horsepower, a maximum power of 201kw and a maximum torque of 337N·m.
1. Large-disposture hydraulic system: Reduce the damping of the hydraulic system by selecting valve blocks and pipeline components with large flow diameter, reduce system heating, and achieve energy-saving effect.
2. First of all, increase the air intake by smoothing and expanding the intake and exhaust channel, increasing the cross-section of the engine valve, improving the compression ratio, changing the opening and closing time of the valve, etc. Secondly, the technical debugging of the intake and exhaust system can be carried out, and even the compressor system can be replaced.
3. Super energy-saving: engine adaptive pumping load energy-saving technology; idling car wash energy-saving technology, power system fuel saving; fuel consumption saving 50,000 yuan/year; whole vehicle matching fuel saving.
4. Maximum power refers to the maximum change in the energy of the circuit component in a unit time of the power supply, which is a physical quantity with size and positive and negative. It specifically refers to the maximum output power here.
5. The water pump needs to have the function of cooling the pump itself during the operation of the pump; the oil pump needs to be able to easily find and solve faults, and often requires self-detection, power-off, protection and other functions. There is also a big difference between the operation mode of the water pump and the oil pump.
Resa L9 crane adopts integrated manufacturing technology and is highly reliable: the factory is built with German technology level, and the engine and chassis research and development and manufacturing are integrated. High-quality products come from Sino-German advanced technology, and the integrated quality ensures reliable manufacturing.
Comparing quality, performance, price, etc., it seems that Resa is better, and Resa heavy machinery is increasingly recognized by industry insiders.Foton Resa Heavy Machinery is a global technology integrated company of Foton Automobile, using integrated research and development, integrated design, integrated manufacturing and integrated service system.
Resa Heavy Machinery adopts a large number of imported testing equipment and adopts the German quality management control system. In addition to meeting the national testing standards, crane products also adopt German testing standards. The driving performance, operation performance and structural strength of cranes have been tested, and the product quality reaches Made in Germany.
1. Very good. The pump truck of Foton Resa is independently developed and manufactured. His pump truck is created with advanced German technology, and has its own special Oman chassis with good technical performance. It uses the American Cummins engine, which has good power performance and is powerful and fuel-saving.
2. Resa is not bad. Zhucheng has built the top intelligent manufacturing base in China for Foton Resa, adopting standard box intelligent manufacturing and advanced innovation-driven technology. The Zhucheng Resa project has achieved the industry's first original box top loading, which maximizes the reliability and matching of the product.
3. Anqing Futian Resa has good R&D treatment. Perfect salary system: Anqing Foton Resa's research and development includes basic salary, performance salary and year-end bonus. Perfect salary adjustment mechanism: Anqing Futian Resa R&D has a salary adjustment at least once a year.
Resa L10 Guoliu vehicle pump, what engine does it use?Trade data for intellectual property checks
author: 2024-12-24 01:26How to detect supply chain inefficiencies
author: 2024-12-23 23:53How to integrate AI in trade data analysis
author: 2024-12-23 23:49Canned foods HS code classification
author: 2024-12-23 23:48Supply chain sustainability metrics
author: 2024-12-23 23:15Global trade scenario planning
author: 2024-12-24 01:22Supply chain optimization with trade data
author: 2024-12-23 23:14Global trade indices and benchmarks
author: 2024-12-23 23:10955.74MB
Check224.75MB
Check388.17MB
Check941.92MB
Check185.59MB
Check594.96MB
Check779.28MB
Check645.47MB
Check653.49MB
Check685.81MB
Check233.92MB
Check761.92MB
Check678.39MB
Check528.22MB
Check483.83MB
Check581.96MB
Check743.55MB
Check991.32MB
Check546.72MB
Check653.94MB
Check359.36MB
Check767.92MB
Check889.95MB
Check159.95MB
Check632.67MB
Check591.56MB
Check858.66MB
Check292.91MB
Check644.23MB
Check316.11MB
Check579.72MB
Check184.51MB
Check761.18MB
Check272.13MB
Check925.37MB
Check257.47MB
CheckScan to install
Trade data-driven market penetration to discover more
Netizen comments More
1541 global market access
2024-12-24 01:09 recommend
2538 How to manage trade credit risks
2024-12-24 00:58 recommend
1037 How to manage port congestion data
2024-12-24 00:25 recommend
2186 How to identify top importing countries
2024-12-23 23:52 recommend
2570 Export quota monitoring software
2024-12-23 23:17 recommend