1. Normal. The original Tianhong 90 motorcycle is an 86-cylinder block, and the sound of Tianhong 90 motorcycle changing the middle cylinder is still the same, indicating that the replaced middle cylinder is also an 86-cylinder block, which perfectly matches the Tianhong 90 motorcycle. After replacing the middle cylinder, the sound and nature of the engine remain stable and there is no abnormality. Therefore, the sound of changing the middle cylinder of Tianhong 90 motorcycle is still normal.
2. The upper left corner of the Japanese cylinder is marked with 85cm, and the upper right corner is HM-C1 or HM-C2 or HM-C3 or HM-B1 or HM-B2 or HM-B3.Domestic products are rarely marked with 85 and most of them are 86, but there are also some marked with 85. The process traces at the left guide wheel hole are also different.
3. The motorcycle cylinders of Tianhong 90 are the same as 85 and 86. Motorcycles, two-wheeled or three-wheeled vehicles driven by gasoline engines and controlled by hand-controlled front wheels, are light, flexible and fast. They are widely used in patrols, passenger and cargo transportation, etc., and are also used as sports equipment.
4. Tianhong 90 was produced by the former Tianjin Honda. It adopts an imported Honda engine with a non-electric start 90CC and a 12V circuit. It is a well-known model in the 1990s. Changing the middle cylinder of Tianhong 90 to 86 will increase fuel consumption, increase the crankshaft and valve load, and reduce the cylinder compression ratio, which has a great impact on power.
5. Tianhong 90 motorcycle cylinders, 85 and 86 are the same.It's just that because the cylinder volume is rounded up after the decimal point and the tail number, if there is no rounding, it is written as 85, and if there is no rounding, it is written as 86. In fact, it is the same. Most manufacturers are marked 85, and there are fewer marked with 86.
6. Tianhong 9o motorcycle cylinder can be replaced with 86. 90 and 86 are the same. It's just that because the number of the decimal point of the cylinder volume is rounded up, the one without rounding is written as 86, and the rounded one is written as 90. In fact, it is the same. Most manufacturers mark 90, and fewer are marked with 86.
1. Jialing 70 imported high-pressure package igniter and Tianhong 90 are not universal. Jialing 70 imported high-voltage package igniter and Tianhong 90 external meridian are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, and the two cannot be used interchangeable.
2. The high-voltage package and igniter of K90 are integrated and cannot be interchanged with TH90. The igniter and high-voltage package must be purchased (Jialing 70 is fine).
3. No. The magnetic motor of Jialing 70 and Tianhong 90 are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, so the two cannot be used in common. Motor refers to an electromagnetic device that converts or transmits electrical energy according to the law of electromagnetic induction.
4. Can't be used. Although Jialing 70 and Jialing 90 are both produced by Jialing Group, the difference between them is still very big. 90 The mouth of the 2 pins above: the left is turned off, and the upper row of the mouth of the 4 pins under the ignition power input on the right: the left output to the high-voltage package, and the lower row of the mouth of the 4 needles on the ground on the right: trigger on the left.
5. It depends on whether the original machine has not been opened! Have you changed the middle cylinder? The original cylinder is 85. It doesn't make much sense if it has been replaced! If you haven't changed it, I suggest you that you need Tianhong 90. Come back with a very durable horizontal cylinder engine. Theoretically, it is fine.Generally, it is an engine equipped with Tianhong 90.
1. The oil filter of the motorcycle is often placed under the cylinder block, and then there are three bolts. In a tightened filter cover, 80% of the motorcycles are in, the engine On the right side, then remove the three bolts, open the cover and take it out. The oil filter is generally used for motorcycle filters, and the replacement cycle is 2000 to 3000.
2. Near the left spark plug. The engine number is uniformly engraved near the left spark plug at the factory, so the Tianhong 90 engine number is near the left spark plug, and the engine number can also be found on the vehicle driving license, which is compiled to prevent engine modification.
3. It is an imported machine. If the five letters "HONDA" on the engine are white and engraved on the engine, it is imported if you don't feel it. On the contrary, if the font is black and deeply engraved, it must be domestic.
HS code correlation with global standards-APP, download it now, new users will receive a novice gift pack.
1. Normal. The original Tianhong 90 motorcycle is an 86-cylinder block, and the sound of Tianhong 90 motorcycle changing the middle cylinder is still the same, indicating that the replaced middle cylinder is also an 86-cylinder block, which perfectly matches the Tianhong 90 motorcycle. After replacing the middle cylinder, the sound and nature of the engine remain stable and there is no abnormality. Therefore, the sound of changing the middle cylinder of Tianhong 90 motorcycle is still normal.
2. The upper left corner of the Japanese cylinder is marked with 85cm, and the upper right corner is HM-C1 or HM-C2 or HM-C3 or HM-B1 or HM-B2 or HM-B3.Domestic products are rarely marked with 85 and most of them are 86, but there are also some marked with 85. The process traces at the left guide wheel hole are also different.
3. The motorcycle cylinders of Tianhong 90 are the same as 85 and 86. Motorcycles, two-wheeled or three-wheeled vehicles driven by gasoline engines and controlled by hand-controlled front wheels, are light, flexible and fast. They are widely used in patrols, passenger and cargo transportation, etc., and are also used as sports equipment.
4. Tianhong 90 was produced by the former Tianjin Honda. It adopts an imported Honda engine with a non-electric start 90CC and a 12V circuit. It is a well-known model in the 1990s. Changing the middle cylinder of Tianhong 90 to 86 will increase fuel consumption, increase the crankshaft and valve load, and reduce the cylinder compression ratio, which has a great impact on power.
5. Tianhong 90 motorcycle cylinders, 85 and 86 are the same.It's just that because the cylinder volume is rounded up after the decimal point and the tail number, if there is no rounding, it is written as 85, and if there is no rounding, it is written as 86. In fact, it is the same. Most manufacturers are marked 85, and there are fewer marked with 86.
6. Tianhong 9o motorcycle cylinder can be replaced with 86. 90 and 86 are the same. It's just that because the number of the decimal point of the cylinder volume is rounded up, the one without rounding is written as 86, and the rounded one is written as 90. In fact, it is the same. Most manufacturers mark 90, and fewer are marked with 86.
1. Jialing 70 imported high-pressure package igniter and Tianhong 90 are not universal. Jialing 70 imported high-voltage package igniter and Tianhong 90 external meridian are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, and the two cannot be used interchangeable.
2. The high-voltage package and igniter of K90 are integrated and cannot be interchanged with TH90. The igniter and high-voltage package must be purchased (Jialing 70 is fine).
3. No. The magnetic motor of Jialing 70 and Tianhong 90 are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, so the two cannot be used in common. Motor refers to an electromagnetic device that converts or transmits electrical energy according to the law of electromagnetic induction.
4. Can't be used. Although Jialing 70 and Jialing 90 are both produced by Jialing Group, the difference between them is still very big. 90 The mouth of the 2 pins above: the left is turned off, and the upper row of the mouth of the 4 pins under the ignition power input on the right: the left output to the high-voltage package, and the lower row of the mouth of the 4 needles on the ground on the right: trigger on the left.
5. It depends on whether the original machine has not been opened! Have you changed the middle cylinder? The original cylinder is 85. It doesn't make much sense if it has been replaced! If you haven't changed it, I suggest you that you need Tianhong 90. Come back with a very durable horizontal cylinder engine. Theoretically, it is fine.Generally, it is an engine equipped with Tianhong 90.
1. The oil filter of the motorcycle is often placed under the cylinder block, and then there are three bolts. In a tightened filter cover, 80% of the motorcycles are in, the engine On the right side, then remove the three bolts, open the cover and take it out. The oil filter is generally used for motorcycle filters, and the replacement cycle is 2000 to 3000.
2. Near the left spark plug. The engine number is uniformly engraved near the left spark plug at the factory, so the Tianhong 90 engine number is near the left spark plug, and the engine number can also be found on the vehicle driving license, which is compiled to prevent engine modification.
3. It is an imported machine. If the five letters "HONDA" on the engine are white and engraved on the engine, it is imported if you don't feel it. On the contrary, if the font is black and deeply engraved, it must be domestic.
HS code alignment with import quotas
author: 2024-12-24 01:35Best global trade intelligence tools
author: 2024-12-24 01:07Export quota monitoring software
author: 2024-12-24 00:20Crude oil (HS code ) export trends
author: 2024-12-23 23:44How to adapt to shifting trade policies
author: 2024-12-23 23:27Canada HS code classification assistance
author: 2024-12-24 00:20Export planning using HS code data
author: 2024-12-23 23:55Top trade data plugins for analytics
author: 2024-12-23 23:35How to verify supplier credibility with data
author: 2024-12-23 23:11418.17MB
Check434.61MB
Check959.66MB
Check693.27MB
Check369.85MB
Check123.44MB
Check266.71MB
Check249.97MB
Check837.35MB
Check166.72MB
Check165.29MB
Check887.77MB
Check819.42MB
Check818.92MB
Check549.94MB
Check699.29MB
Check643.66MB
Check169.95MB
Check869.74MB
Check323.28MB
Check919.28MB
Check491.22MB
Check961.92MB
Check655.15MB
Check881.13MB
Check722.54MB
Check468.84MB
Check132.49MB
Check254.79MB
Check571.98MB
Check975.87MB
Check744.93MB
Check929.75MB
Check879.53MB
Check785.87MB
Check882.28MB
CheckScan to install
HS code correlation with global standards to discover more
Netizen comments More
730 HS code-based green supply chain metrics
2024-12-24 01:29 recommend
944 Trade data for market diversification
2024-12-24 01:18 recommend
2209 HS code correlation with global standards
2024-12-24 00:48 recommend
2897 HS code-driven market penetration analysis
2024-12-24 00:13 recommend
1441 Construction materials HS code references
2024-12-23 23:41 recommend