HS code-based SLA tracking for vendors

Contents I of this articleView:

• 1,HS code-based SLA tracking for vendors Hisense mobile phone has been applying for verification after replying to the factory settings
• 2, How to enter recovery on Hisense mobile phone
• 3, What to do if there is something wrong with the Hisense mobile phone system and it doesn't work when it is turned on
• 4, What should I do if the Hisense mobile phone can't be turned on after the system is updated?
• 5, Hisense mobile phone How to flash
• 6, How to set the Android system Hisense mobile phone

Hisense mobile phone has been applying for verification after replying to the factory settings

If the user encounters such prompts, it means that the program has crashed and cannot be repaired directly. You can fix it by restarting your mobile phone. If you can't restart the phone, you can try to remove and reinstall the battery directly.

The TV has a software failure or hardware failure, resulting in the failure of restoring the factory settings. In this case, it is recommended to contact Hisense customer service or professional and technical personnel for repair. There is a software failure or hardware failure on the TV, resulting in the failure of restoring the factory settings. In this case, it is recommended to contact Hisense customer service or professional and technical personnel for repair.

Open the settings. Open the advanced settings. Click to reply to factory settings. If you want to fully restore the production settings, it is recommended to click on all two options on the right.Then click the restore mobile phone production settings below. If you have set a password, please enter it and click Next.

How to enter recovery on Hisense mobile phone

1. Hisense mobile phone double clear operation steps: shutdown. At the same time, press and hold the power button and the volume button to turn on. When the screen lights up, SMART releases the power-on button, and the small robot and triangle with an exclamation mark will be displayed on the screen.

2. Method to enter Recovery mode: Method 1: If the mobile phone is turned on, please turn off the power first, cut off the battery and install it. In the shutdown, press and hold the power key + Home button at the same time until the Recovery interface appears.

3. The flash of Hisense mobile phone is a little different from that of other mobile phone flashes, that is, it uses the recovered that has been flashed to flash the card. The simple clubhouse is that the third-party recovery must be installed in the mobile phone before flashing.

What should I do if there is a problem with the Hisense mobile phone system that does not move when it is turned on

Solution: If the mobile phone battery is removable, you can directly remove the battery and restart the mobile phone. If the mobile phone is an all-in-one computer, that is, the battery cannot be disassembled. If this is the case, you can try to press the power button for 10 seconds. Force the power supply to be interrupted and then restarted.

It is recommended to force restart the system first (press and hold the HOME button + power-on button for 8 seconds).Go to the after-sales center and ask the engineer to detect whether it is a problem with the screen or the motherboard. Try to connect the PC and use the [Restart] function in PP Assistant, iTools and other tools. Update the system. System upgrade method: Home Screen - Open Settings - General - Software Update.

Method 1: Force restart of the mobile phone. Sometimes the mobile phone will get stuck, causing the boot page to be unable to enter the system. At this time, you can try to force restart the phone. The method is to press the power button and the volume down button at the same time until the mobile phone screen is black, and then press the power button to turn on the power button.

Force shutdown, try to restart the mobile phone. Connect the mobile phone to the computer for flash processing. Check whether the inner screen of the mobile phone is damaged. If so, the inner screen of the mobile phone needs to be replaced. Check whether the motherboard of the mobile phone is damaged. If so, the motherboard of the mobile phone needs to be replaced.

Can you enter Fastboot? How to enter Fastboot: In the shutdown state, first hold down the "R key" and then hold down the "Volume Reduction Key" and then hold down the "Shutdown Key". When the boot screen appears, release your hand to enter Fastboot. Please connect your mobile phone to the computer and flash a complete system package with Miflash flash.

What should I do if the Hisense mobile phone can't be turned on after the system is updated?

It is recommended to press the [power button] and [volume-] keys for a long time for 10 seconds to enter Fastboot mode. Connect to the PC and use Flash Tool to flash the official Rom repair system.

Uninstall some unnecessary software. There are too many mobile phone installers and too many software running at the same time, it is easy to not work, resulting in restarting. 3) Software conflicts.

If the mobile phone cannot enter the system after upgrading, it is recommended to try to restart the machine: press and hold the power button and the volume down button for more than 7 seconds at the same time to restart the device;If it is a removable battery mobile phone, press and hold the power button for 8-10 seconds to restart the machine.

Flashing steps: Copy the flash package [download the most suitable flash package for your system from the Internet] to your SD card. Only when USB debugging is turned off can your mobile phone memory be read out. Then enter the recovery mode, and the buttons to enter the recovery mode are different.

The solution to the problem that the mobile phone update system cannot be turned on is as follows: Restart the mobile phone: When our mobile phone enters the system, it may be a problem with our mobile phone system, which may be stuck. At this time, we can restart the mobile phone and then turn it on again.

The solution to the shutdown when the mobile phone system is updated: press the power button for more than 10 seconds to see if it can be forced to turn on.If it can be turned on, please back up important information and restore the factory settings or upgrade to the latest software version.

How to flash Hisense mobile phone

1. Install the Hisense mobile phone driver on the computer, and the mobile phone turns on USB debugging and connects to the computer. Drivers are generally downloaded by the computer by itself after the mobile phone is connected to the computer. If not, download one.

2. Download a flash tool on the computer. In the shutdown state, long press the power button and the volume down button for 5 seconds to automatically enter a flash interface. Connect the mobile phone with a data cable. The flash tool will identify the mobile phone model and give the corresponding flash package to download.

3. Download Flash Genie on your computer. Connect your mobile phone to the computer through a data cable, turn on the USB debugging mode, and then turn on Flash Genie.After the driver installation is completed, it will be connected to the mobile phone.

4. The first type: press and hold "Volume + do not play, then press and hold "Volume -" do not play, and then press and hold the "Power on" key, and wait for the screen to appear as shown in the figure below. Loosen three more buttons. The second type: press and hold "Volume + Do not play", and then press and hold the "Power on" key, waiting for the screen to appear as shown in the figure below. Loosen three more buttons.

5. How to use the flash package 2 (the download is a zip format package, and use winrar to check that it is not the Uv2a folder): Don't unzip the download package and put it on the tf card and load it into the mobile phone.

How to use Android Hisense mobile phone

Thank you for your support for Hisense mobile phone! One way is to restore the factory settings.Note: Restoring the factory settings will clear the data stored on the mobile phone (such as phone book, information, software data, etc.). Please make a backup in advance.

Hisense mobile phone forcibly restores factory settings. First, prepare the data in the mobile phone (text messages, contacts, downloaded applications, etc.), and then follow the steps below to restore the factory settings; two ways: (1) When the mobile phone is turned on, enter the mobile phone settings - save - pull to the bottom of the menu, click restore Just return to the factory setting.

Turn off the mobile phone and press and hold the power-on key + volume increase button (some models are volume reduction, you have to try it yourself) to enter the interface and then select double-clear English (if you can choose Chinese, use Chinese). Note that the touch screen is invalid on this page. To select the power-on key up and down through the volume key to confirm, click the double-clear English is fine.

The formatting machine is the same as the traditional flash machine. Just press the volume-minus button and the on-off key for a long time. After entering, press the key for a long time to enter the flash interface, select wipe data factory reset to erase the data, restore the factory settings, that is, The meaning of.

In the shutdown state, press and hold the power button and the side volume button at the same time to turn on the mobile phone. 2 Press and hold the side volume button for about 15 seconds until the android icon is displayed on the mobile phone screen and the mobile phone enters recovery mode. 3 Click the lower right corner of the mobile phone screen to display a menu option.