1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
Tariff impact simulation tools-APP, download it now, new users will receive a novice gift pack.
1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
How to navigate non-tariff barriers
author: 2024-12-23 22:23Supply chain disruption tracking
author: 2024-12-23 21:55Global import export data subscription
author: 2024-12-23 22:59US-China trade data comparisons
author: 2024-12-23 22:35Top trade data plugins for analytics
author: 2024-12-23 22:31HS code-based invoice validation
author: 2024-12-23 21:54165.73MB
Check718.84MB
Check171.85MB
Check821.77MB
Check513.76MB
Check612.73MB
Check699.15MB
Check524.47MB
Check298.75MB
Check362.98MB
Check529.67MB
Check588.31MB
Check988.39MB
Check628.32MB
Check463.47MB
Check488.44MB
Check995.69MB
Check252.13MB
Check765.58MB
Check269.71MB
Check548.96MB
Check525.57MB
Check394.59MB
Check443.82MB
Check743.13MB
Check282.27MB
Check756.75MB
Check226.84MB
Check412.83MB
Check484.24MB
Check442.89MB
Check774.72MB
Check617.24MB
Check962.46MB
Check292.69MB
Check919.46MB
CheckScan to install
Tariff impact simulation tools to discover more
Netizen comments More
2448 HS code-based invoice matching
2024-12-23 22:59 recommend
1414 How to identify monopolistic suppliers
2024-12-23 22:07 recommend
890 International trade KPI tracking
2024-12-23 21:45 recommend
1110 HS code-based supplier development
2024-12-23 21:33 recommend
2367 How to comply with dual-use regulations
2024-12-23 20:32 recommend