The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
Trade data for GDP correlation analysis-APP, download it now, new users will receive a novice gift pack.
The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
How to simplify export documentation
author: 2024-12-24 01:56Supply chain disruption tracking
author: 2024-12-24 01:01HS code-based customs broker selection
author: 2024-12-24 00:46How to align trade data with demand planning
author: 2024-12-23 23:56Pharma R&D materials HS code verification
author: 2024-12-24 01:35How to leverage customs rulings data
author: 2024-12-24 01:29Exotic fruits HS code references
author: 2024-12-24 00:31HS code mapping to non-tariff measures
author: 2024-12-24 00:09Real-time supply chain financing insights
author: 2024-12-23 23:58339.53MB
Check166.23MB
Check831.41MB
Check614.68MB
Check371.54MB
Check814.18MB
Check615.76MB
Check324.48MB
Check245.25MB
Check519.73MB
Check899.24MB
Check831.68MB
Check291.28MB
Check981.97MB
Check933.71MB
Check192.75MB
Check655.29MB
Check363.56MB
Check232.45MB
Check449.17MB
Check124.58MB
Check245.44MB
Check489.66MB
Check423.19MB
Check566.38MB
Check739.49MB
Check114.68MB
Check189.79MB
Check661.11MB
Check452.49MB
Check116.24MB
Check815.66MB
Check862.81MB
Check149.98MB
Check175.26MB
Check922.19MB
CheckScan to install
Trade data for GDP correlation analysis to discover more
Netizen comments More
1643 Global trade disruption analysis
2024-12-24 01:29 recommend
1611 How to structure long-term contracts
2024-12-24 01:26 recommend
382 Data-driven trade invoice verification
2024-12-24 01:18 recommend
838 HS code-based vendor qualification
2024-12-24 01:05 recommend
631 Import data by HS code and country
2024-12-24 00:20 recommend