customs data reports

List of contents of this article:

• 1,customs data reports What's wrong with pressing "F1" every time the computer is turned on to enter the system?
• 2, Dell computer needs to press F1 to enter the system
• 3, The computer must press F1 to enter the system. How to solve it?
• 4, Press F1 to enter the system when starting up. How to solve it?
• 5, You need to press f1 to enter the system when the computer is turned on. How to solve it?
• 6, Can the computer press f1 to enter the system?

What's wrong with pressing "F1" every time the computer is turned on to enter the system?

1. The motherboard is not charged. The motherboard does not have enough power to save the settings of COMS, so that the mainThe BLOS of the board can also be saved. In this way, when it is turned on, only by pressing F1 can it enter the BLOS. The motherboard has started the floppy drive, so the second time you start the computer, you need to press F1 to jump the floppy drive to start the computer.

2. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data. It can be divided into the following situations: in fact, there is no floppy drive or the floppy drive is broken, but the BIOS is set up with a floppy drive, which leads to press F1 to continue. .

3. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data, which can be divided into the following situations: in fact, there is no floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to pressing F1 to continue. Continue.

4. If the driver is not installed and the system is damaged, it will also cause you to press f1 to start up. If the driver is damaged, reinstall a driver or ask a professional to repair it. If there is a problem with the hard disk, you can consider using software to repair it, or you can take it to the repair shop to replace the hard disk.

5. It may be that your BIOS battery is out of power. If so, please replace it. If it is for other reasons, please follow the following method. The reason and solution for pressing F1 to enter the system when booting: Press F1 when booting up. This is caused by a BIOS setting error, which is generally caused by the following situations.

You need to press F1 to enter the system

1. You need to press the F1 key to enter the computer to enter, mainly because the settings in the BIOS do not match the real hardware data. It can be divided into the following situations. The error is that there is actually no floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to pressing F1 to continue.

2. On the blue Dell logo screen you see after the power-on, press twice [Press F2 to enter the BIOS settings.

3. First of all, according to the prompts on the page, press the "F2" key on the keyboard or we can also press the "F12" key. For example, press the "F12" key and click to select "Bios Setup" on the page that appears. Then click the "Post Behavior" option in the options bar on the left side of this page.

4. Processing method: After turning on or restarting the computer, when you see Dell's Logo on the startup screen, press F2 to enter the BIOS. After entering the BIOS, press F9 to restore the original settings of CMOS.

5. Category 1: (Award 0 motherboard) Press F2 to enter BIOS, select: STANDARD CMOS FEATURES DRIVE A: Set to None, DRIVE B: Set to None, press F10 to save, enter "Y" and return.

The computer must press F1 to enter the system. How to solve it?

Troubleshooting that you need to press F1 to enter the system. Under normal circumstances, the requirement to press F1 to enter the system is caused by a small problem that the BIOS settings of the system do not affect the start-up of the system, so please check the inconstance between the hardware information settings in the BIOS and the actual situation. A common fault is: the battery on the motherboard is dead.

Solution: Change the motherboard battery.You have set up the floppy drive to start up, but there is something wrong with your floppy drive. Solution: a. Press DEL to enter bios, start the boot order, and turn off the floppy drive to start.

The first category: (Award 0 motherboard) Press DEL or F2 to enter BIOS when booting, select: DRIVE A in STANDARD CMOS FEATURES: set to None, DRIVE B: set Press F10 to save for None, enter "Y" and enter.

Power-on prompt Please enter setup to recover BIOS setting, press F1 run setup. This prompt is to ask you to reset the bios, or reset some options.

The way to cancel pressing f1 to enter the system is very simple. Press delete quickly when starting up, which is to enter the system settings of the BIOS. Just change flopy to disabel in the settings. Remember to save and exit, otherwise it's useless.

Solution: a. Press DEL to enter the BIOS, start the start order, and turn off the floppy drive to start. Do I need to press f10 to enter the system + solution when the computer is turned on? Do I need to press f10 to enter the system + solution when the computer is turned on? Solution: Change the motherboard battery. You have set up the floppy drive to start up, but there is something wrong with your floppy drive.

Press F1 to enter the system when starting up. How to solve it?

1. The method of pressing F1 to solve the problem of booting: press the Del key to start up, enter the BIOS settings, select the first basic setting, and invalidate the floopy setting without Disabel.

2. The first category: (Award 0 motherboard) Press DEL or F2 to enter BIOS, select: DRIVE A in STANDARD CMOS FEATURES: set to None, DRIVE B: Set to None, press F10 to save, enter "Y" and press Enter.

3. You need to press the F1 key to enter the power-on, mainly because the settings in the BIOS do not match the real hardware data, which can be divided into the followingSituation: In fact, there is no floppy drive or the floppy drive is broken, but the floppy drive is set in the BIOS, which leads to pressing F1 to continue.

4. Solution: Change the motherboard battery. You have set up the floppy drive to start up, but there is something wrong with your floppy drive. Solution: a. Press DEL to enter bios, start the boot order, and turn off the floppy drive to start.

When the computer is turned on, you need to press f1 to enter the system. How to solve it?

Solution: Change the motherboard battery. You have set up the floppy drive to start up, but there is something wrong with your floppy drive. Solution: a. Press DEL to enter bios, start the boot order, and turn off the floppy drive to start.

If it is normal, you can choose to reinstall the system.Update BIOS. If the computer cannot start normally even after pressing F1, it may be that the BIOS version is too old. It is recommended to update the BIOS version. Before installing the BIOS upgrader, you need to make sure that the upgrader is really correct and understand the operating instructions of the upgrader.

Hello, the reason and solution for starting by pressing F1 to enter the system: Press F1 when starting up. This is caused by a BIOS setting error, which is generally caused by the following situations. If you don't have a floppy drive but the floppy drive is enabled, you can disable the floppy drive.

It can be solved according to the following method: (1) The first reason: The computer's motherboard BIOS turns on the floppy drive. Although the computer does not have a floppy drive, the floppy drive function is enabled, so the floppy drive can be disabled.

Can the computer enter the system by pressing f1?

The third reason: that is, the motherboard battery is out of power or insufficient. When the computer's motherboard button battery is less than 6 volts, the COMS random storage cannot be saved, so the BIOS is chaotic, causing the first startup item to become a floppy drive, so the system cannot be booted, and there will also be Only F1 can enter the system.

The motherboard has no power. The motherboard does not have enough power to save the settings of COMS, so that the BLOS of the motherboard can also be saved. In this way, when it is turned on, you can only enter the BLOS by pressing F1 again. The motherboard has started the floppy drive, so the second time you start the computer, you need to press F1 to jump the floppy drive to start the computer.

Under normal circumstances - it is required to press F1 to enter the systemAll the BIOS settings of the system are caused by small problems that do not affect the start-up of the system, so please check whether the hardware information settings in the BIOS are inconsistent with the actual situation. The battery of the motherboard is dead. The battery on the motherboard is dead. Solution: Change the motherboard battery.

First of all, we start the computer and press the DEL key to enter the BIOS settings. There are two projects in the STANDARD COMS FEATURES project, DRIVE A and DRIVE B, of which the default BIOS setting is that the value of DRIVE A is 44. M, 5in, set it to NONE.