1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
How to track seasonal trade patterns-APP, download it now, new users will receive a novice gift pack.
1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
AI-driven trade data analytics
author: 2024-12-23 23:51HS code mapping to non-tariff measures
author: 2024-12-23 23:38Wool and yarn HS code verification
author: 2024-12-23 23:36Customized market entry reports
author: 2024-12-23 23:18Tariff reduction opportunity analysis
author: 2024-12-23 22:42Real-time commodity flow tracking
author: 2024-12-24 00:58Dynamic duty drawback calculations
author: 2024-12-23 23:37HS code electrical machinery data
author: 2024-12-23 23:27HS code compliance for customs
author: 2024-12-23 22:28Real-time customs inspection logs
author: 2024-12-23 22:13129.42MB
Check311.51MB
Check157.25MB
Check698.18MB
Check565.61MB
Check668.49MB
Check985.99MB
Check653.84MB
Check678.93MB
Check458.48MB
Check596.82MB
Check623.31MB
Check533.55MB
Check484.75MB
Check655.54MB
Check915.56MB
Check483.79MB
Check482.89MB
Check211.45MB
Check135.57MB
Check193.43MB
Check942.65MB
Check999.47MB
Check675.71MB
Check559.35MB
Check879.99MB
Check171.83MB
Check682.87MB
Check651.63MB
Check518.89MB
Check558.35MB
Check438.17MB
Check289.25MB
Check114.66MB
Check463.51MB
Check274.75MB
CheckScan to install
How to track seasonal trade patterns to discover more
Netizen comments More
482 How to align trade data with demand planning
2024-12-24 00:54 recommend
321 Global trade shipping route optimization
2024-12-23 23:40 recommend
568 Polymer resins HS code verification
2024-12-23 22:55 recommend
2703 HS code-based cargo insurance optimization
2024-12-23 22:23 recommend
2724 How to align trade data with ERP systems
2024-12-23 22:12 recommend