India global market access guide

List of contents of this article:

• 1, What kind of material is good for car anti-collision beam?
• 2 、 How much is the front anti-collision beam of the car?
• 5, Does the rear anti-collision steel beam of the car play a big role?

What kind of material is good for car anti-collision beam?

Aluminum alloy is good. According to the information released by the query car master, it can be learned. Aluminum alloy has better strength and compressive resistance, and lighter specific gravity. Aluminum alloy is good, aluminum alloy has good toughness, is not easy to break in impact, deformation is easy to recover, and the strength is sufficient.

Anti-collision steel beam aluminum alloy is the best, followed by steel. Fiberglass does not meet the requirements of anti-collision beam at all, unless it is very thick.In fact, the full name of aluminum alloy is aluminum-magnesium alloy. Most of it is aluminum and has a small amount of magnesium.

[Pacific Automobile Network] The material of Audi a6l anti-collision beam is carbon steel. The anti-collision beam of this material is because the anti-collision beam of this material has a low water absorption rate, high impact resistance, rigidity, oil resistance, cold resistance, chemical resistance, and also has good dimensional stability and resistance. Aging performance.

[Pacific Automobile Network] Baolai front anti-collision beam is made of steel. The front anti-collision beam of this material is because the front anti-collision beam of this material has a low water absorption rate, high impact resistance, rigidity, oil resistance, cold resistance, chemical resistance, and also has good dimensional stability and aging resistance. Can.

[Pacific Automobile Network] Hyundai LeadsThe material of the anti-collision beam is steel. The anti-collision beam of this material is because the anti-collision beam of this material has low water absorption rate, high impact resistance, rigidity, oil resistance, cold resistance, chemical resistance, and also has good dimensional stability and aging resistance.

BMW X1 front and rear anti-collision steel beams are preferred. The thickness of the BMW X1 front anti-collision beam is greater than 3mm. The material is aluminum alloy, with cushioning foam, and the thickness is medium. The thickness of the rear anti-collision beam is 1mm, which belongs to single-layer stamping and has no buffer foam.

How to deal with the front anti-collision beam of the car?

1. Just go to the repair shop to repair it; if it is deformed in a large area, it is recommended to replace it immediately. Because the deformation is serious, it will be harmful, and in case of collision, it may not work; the anti-collision steel beam is a U-shaped groove stamped from cold-rolled steel plate, which is connected to the longitudinal beam of the frame, as the first barrier to the passive safety of the car.

2. The treatment method of the front anti-collision beam of the car is as follows: the deformation of the anti-collision beam is not equivalent to the damage to the beam, which can only be said to be possible. The car beam generally refers to the longitudinal beam of the car, which runs from the front to the rear of the car.

3. Slight overweight can be repaired, and severe overweight must be replaced.There are three main functions of the car beam: When the vehicle collides, the front bumper anti-collision beam distributes the energy generated by any form of bias and frontal collision as evenly as possible on the two energy-absorbing brackets, so as to absorb energy evenly as possible and transmit the impact force to other energy-absorbing parts.

4. The anti-collision beam is installed horizontally, and the two ends are fixed on the left and right longitudinal beams respectively. When there is a dent in the lower beam of the car, first carry out sheet metal repair to restore the lower beam of the car to its original state, and then carry out anti-rust treatment to keep the body of the car neat and not to be oxidized, and to prevent rust on the depression. Common reasons for the dentation of the lower beam of the car: flying cross-disaster.

5. The repair or replacement of the front anti-collision steel beam of the car after deformation depends on the degree of deformation. If it is a slight deformation, it can not be replaced. If it is a large-area deformation, it should be replaced with a new one.

6. The deformation of the anti-collision beam is not equivalent to the damage to the beam, which can only be said to be possible. The treatment of the front anti-collision beam of the car is as follows: The deformation of the anti-collision beam is not the same as the damage of the beam, and it can only be said that it is possible.

Can the car install anti-collision beams by itself?

1. The car can install anti-collision beams by itself. In fact, what really plays a role in safety protection is the anti-collision steel beam in the bumper. According to normal thinking, the anti-collision beam should definitely be equipped with two, the front one, which plays a role when following others, and the back one, which plays a role when others follow.

2. The car can be equipped with anti-collision beams by itself, but the addition of front and rear anti-collision devices is not considered a private modification. But be careful not to cover the license plate of the car.

3. If this car itself does not have anti-collision steel beams - there are no versions around the world, then it is not good to install it by yourself.

4. It is legal to install anti-collision steel beams after purchase, and it is not a private modification of the vehicle. According to Article 16 of the "Regulations on the Registration of Motor Vehicles" of the Ministry of Public Security, small and micro passenger vehicles are equipped with front and rear anti-collision devices; freight motor vehicles are equipped with windproof covers, water tanks, toolboxes, spare tire racks, etc.; and the interior decoration of motor vehicles is added.

5. The model Highlander itself can reinforce the rear anti-collision sorghum. The 2022 Highlander can be equipped with anti-collision beams and front and rear anti-collision devices by itself, which is not a private modification, but be careful not to cover the license plate.

6. Hello, car owner, this can generally cost 200-Between 300 is fine. I hope my answer will be helpful to you. I wish you a happy life. [If you have any questions about the car, please ask the car master. 4S store professional technician, 10 minutes to solve.

How much is the front anti-collision beam of the car?

The front anti-collision beam of the car may cost about 500 yuan: if the deformation of the anti-collision beam is not serious, the vehicle beam is not damaged; but if the deformation of the anti-collision beam is serious, the vehicle beam will also bend and deform. The anti-collision beam and the car beam are connected; the car beam generally refers to the longitudinal beam of the car running from the front to the rear of the car.

The car is deformed when it hits the door from the front, and the shell cannot be installed. How much does it cost to repair the front anti-collision beam? If the front anti-collision beam can be made of metal plate, the front rod can be added. In the repair shop, it costs about 300 to 500 yuan.The metal plate will not come back.

The replacement of the front anti-collision beam of Red Flag H5 will cost about 4,000 yuan.

The price of accessories for the rear anti-collision steel beam of Volkswagen Swift's original factory is 1,300 yuan, and the installation fee in the 4S store is 300 yuan, so the total maintenance cost is 1,600 yuan.

Hello, it will take about 600 yuan to replace the anti-collision steel beam with an original repair shop.

How much does it cost to replace the front anti-collision beam of this car (material working hours)? Take the BMW 5 Series 2021 530Li Premium M Sports Set as an example, the cost of replacing the front anti-collision steel beam (take the circulation price of the original factory accessories in Beijing as an example, due to regional differences, this price is for reference only) The original factory recommended retail price of the accessories: 4459 yuan.

Does the rear anti-collision steel beam of the car play a big role?

1. The function of anti-collision steel beams is to transmit impact force in the event of a serious collision, which can protect the body and some parts on the car from damage in the event of a minor collision. Anti-collision steel beams are very important for cars. Anti-collision steel beams are not structural parts, because this part is connected to the car body by bolts.

2. Installing anti-collision steel beams must be effective. Some materials have been extracted. I hope it will be helpful. What is anti-collision steel beams? Anti-collision steel beams are U-shaped grooves made of cold-rolled steel plates stamped and connected to the longitudinal beams of the frame. As the first barrier for passive safety of automobiles, anti-collision steel beams are to absorb and mitigate external impact. An important safety device for the front and rear of the body.

3. The role of anti-collision steel beamsIt is to transmit impact force in the event of a serious collision and protect the body and some parts of the car from damage in the event of a minor collision. This part is very important for cars. The anti-collision steel beam is not a structural part, because this part is connected to the car body by bolts.