1. Click "System Restore" in the "System Protection" interface just now. Click Next in the pop-up system restore prompt window. Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
2. In the shutdown state, press the "NOVO" key on the keyboard, and there is a twist like a curved arrow, and you can restore it with one click. When the HP notebook is turned on, there will be a prompt of ESC information in the lower left corner. At this time, press the ESC key to open the menu, and press F11 to enter the system recovery program.
3. Open the control panel, and then click System and Security. Click the option to restore files from backup. At the bottom of the interface that appears, click Restore System Settings or Computer, and then click Open System Restore. Select the recommended restore point, and follow the prompts to press the next step.
4. You can check the following methods: restore all settings and clear all data: enter settings--system management/more settings--backup and reset/restore factory settings--restore all settings, clear all data.Enter the recovery mode, select to clear all data, and then restart the device.
5. Try to use "System Restore" first: click "Start - Help and Support" to find the project restored by the system. Just follow the prompts. When selecting the restore point, select the restore point established by the date before deleting the file.
6. The premise is that you have the restore software, you can enter the safe mode, and the system can still run without jams. Without these, it cannot be restored. Press F8 to enter the safe mode. The operation method is the same as the normal mode. Right-click the computer to restore the computer to select Properties, select System Protection on the right, System Restore, and follow the steps.
After pressing the power-on key or restarting the notebook, (before the boot screen appears), quickly press the f9 key on the keyboard, and the words "Please wait a moment" will appear below the boot screen. After a short black screen, this menu interface appears. Select "Troulficult Solution".
Click "System Restore" in the "System Protection" interface just now. Click Next in the pop-up system restore prompt window. Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
When it comes to system restoration, I believe many friends will think of GHOST restoration. Now I will introduce this method;Before using GHOST to restore the system, we need to use GHOST to back up the system. We just need to click the one-click backup system and wait for it to complete the backup.
Under the condition that it is turned on, proceed according to the operation. Find the system restore. First, open the start menu and select "Attachments" "System Tools" "System Restore".
How to operate the computer recovery system Method 1: Connect the computer to the power supply, and press or click the F10 key to enter the system recovery factory interface. Method 2: Connect the computer to the power supply. In the power-on state, open the Huawei Computer Butler, click more icons, and select the settings center system to restore the factory settings.
If you have done a one-click backup when installing the system, you can use the one-click restore command in the boot menu to restore the system. GHOST manual recovery If the one-click restore program is not installed, but there is a GHO backup file in the non-system partition of the computer, you can run the GHOST program to manually restore the system.
Turn on the computer, select "Start", select "Settings", and enter the settings page.After entering, select "Update and Security" to enter the next page. After entering, select "Restore" to enter the next page. After entering, select the "Start" button under "Reset This Computer".
WindowsXP system: Press the F11 key to enter the one-click restore page. If the restore software is not installed, start the system options page - press F8 to enter the advanced options and select one-click restore. Windows7 system: Press F11 to start up and select Advanced - restore the system to the past time or directly restore the system to factory settings.
1. Method 1: Connect the computer to the power supply, and press or click the F10 key to enter the system restore factory interface.Method 2: Connect the computer to the power supply. In the power-on state, open the Huawei Computer Butler, click more icons, and select the settings center system to restore the factory settings.
2. Search to create a restore point from the taskbar and select it from the search results list. In the "System Protection" tab, select "Create". Enter the description of the restore point, and then select "Create" and "OK" in turn.
3. The premise is that you have the restore software, you can enter the safe mode, and the system can still run without jams. Without these, it cannot be restored. Press F8 to enter the safe mode. The operation method is the same as the normal mode. Right-click the computer to restore the computer to select Properties, select System Protection on the right, System Restore, and follow the steps.
4. You must make sure that the system restore is turned on before, otherwise the operating system cannot be restored.Make sure that it is turned on, and proceed according to the operation. Find the system restore, open the start menu, select "Attachments" "System Tools" "System Restore", find the system restore point, and find the most suitable time point for system restore.
5. Restoring the system refers to returning to a certain state before the system, which can help you restore the normal operation of the computer. You can use the built-in restore function of Windows to complete this operation. The specific steps are as follows: open the "Settings" app.
1. Right-click "Computer", select Properties, click the "System Protection" tab after entering, and click "System Restore" in the "System Protection" interface just now. Click Next in the pop-up system restore prompt window.Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
2. How to operate the computer recovery system: Connect the computer to the power supply, and press or click the F10 key to enter the system recovery factory interface. Method 2: Connect the computer to the power supply. In the power-on state, open the Huawei Computer Butler, click more icons, and select the settings center system to restore the factory settings.
3. Open the "Settings" app. In Windows 10, you can open the Settings app by clicking the menu icon in the lower right corner or using the shortcut "Win I". In "Settings", click "Update and Security". In the "Update and Security" interface, click "Restore".
fourIf you want to restore the original system version after 10 days, or you have installed Windows 10 in other ways, you need to use installation media (such as USB flash drive or DVD) to reinstall the original system.
1. Click "System Restore" in the "Destructor System Protection" interface just now. Click Next in the pop-up system restore prompt window. Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
2. No need for CD-ROM, USB disk to install the system, easy 5-step one-click restore system, can restore your operating system to the initial state (only restore the system disk, no operation on other disks.
3. Right-click on the desktop and select Personalization. Then click the control panel in the upper left corner. Just select the recovery. Click one of them to open the system and restore it. Finally, follow the operation steps to restore the system to complete.
4. Operation program: iso mirror 0 First, make the old Maotao boot USB disk according to the tutorial provided above, and then copy the original win10 system iso mirror image to the root directory of the old Maotao USB disk. Insert the USB flash drive into the computer, press F1F11 or Esc and other keys after restarting the computer, and select the USB flash drive option in the pop-up boot menu.
Dynamic customs duty calculation-APP, download it now, new users will receive a novice gift pack.
1. Click "System Restore" in the "System Protection" interface just now. Click Next in the pop-up system restore prompt window. Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
2. In the shutdown state, press the "NOVO" key on the keyboard, and there is a twist like a curved arrow, and you can restore it with one click. When the HP notebook is turned on, there will be a prompt of ESC information in the lower left corner. At this time, press the ESC key to open the menu, and press F11 to enter the system recovery program.
3. Open the control panel, and then click System and Security. Click the option to restore files from backup. At the bottom of the interface that appears, click Restore System Settings or Computer, and then click Open System Restore. Select the recommended restore point, and follow the prompts to press the next step.
4. You can check the following methods: restore all settings and clear all data: enter settings--system management/more settings--backup and reset/restore factory settings--restore all settings, clear all data.Enter the recovery mode, select to clear all data, and then restart the device.
5. Try to use "System Restore" first: click "Start - Help and Support" to find the project restored by the system. Just follow the prompts. When selecting the restore point, select the restore point established by the date before deleting the file.
6. The premise is that you have the restore software, you can enter the safe mode, and the system can still run without jams. Without these, it cannot be restored. Press F8 to enter the safe mode. The operation method is the same as the normal mode. Right-click the computer to restore the computer to select Properties, select System Protection on the right, System Restore, and follow the steps.
After pressing the power-on key or restarting the notebook, (before the boot screen appears), quickly press the f9 key on the keyboard, and the words "Please wait a moment" will appear below the boot screen. After a short black screen, this menu interface appears. Select "Troulficult Solution".
Click "System Restore" in the "System Protection" interface just now. Click Next in the pop-up system restore prompt window. Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
When it comes to system restoration, I believe many friends will think of GHOST restoration. Now I will introduce this method;Before using GHOST to restore the system, we need to use GHOST to back up the system. We just need to click the one-click backup system and wait for it to complete the backup.
Under the condition that it is turned on, proceed according to the operation. Find the system restore. First, open the start menu and select "Attachments" "System Tools" "System Restore".
How to operate the computer recovery system Method 1: Connect the computer to the power supply, and press or click the F10 key to enter the system recovery factory interface. Method 2: Connect the computer to the power supply. In the power-on state, open the Huawei Computer Butler, click more icons, and select the settings center system to restore the factory settings.
If you have done a one-click backup when installing the system, you can use the one-click restore command in the boot menu to restore the system. GHOST manual recovery If the one-click restore program is not installed, but there is a GHO backup file in the non-system partition of the computer, you can run the GHOST program to manually restore the system.
Turn on the computer, select "Start", select "Settings", and enter the settings page.After entering, select "Update and Security" to enter the next page. After entering, select "Restore" to enter the next page. After entering, select the "Start" button under "Reset This Computer".
WindowsXP system: Press the F11 key to enter the one-click restore page. If the restore software is not installed, start the system options page - press F8 to enter the advanced options and select one-click restore. Windows7 system: Press F11 to start up and select Advanced - restore the system to the past time or directly restore the system to factory settings.
1. Method 1: Connect the computer to the power supply, and press or click the F10 key to enter the system restore factory interface.Method 2: Connect the computer to the power supply. In the power-on state, open the Huawei Computer Butler, click more icons, and select the settings center system to restore the factory settings.
2. Search to create a restore point from the taskbar and select it from the search results list. In the "System Protection" tab, select "Create". Enter the description of the restore point, and then select "Create" and "OK" in turn.
3. The premise is that you have the restore software, you can enter the safe mode, and the system can still run without jams. Without these, it cannot be restored. Press F8 to enter the safe mode. The operation method is the same as the normal mode. Right-click the computer to restore the computer to select Properties, select System Protection on the right, System Restore, and follow the steps.
4. You must make sure that the system restore is turned on before, otherwise the operating system cannot be restored.Make sure that it is turned on, and proceed according to the operation. Find the system restore, open the start menu, select "Attachments" "System Tools" "System Restore", find the system restore point, and find the most suitable time point for system restore.
5. Restoring the system refers to returning to a certain state before the system, which can help you restore the normal operation of the computer. You can use the built-in restore function of Windows to complete this operation. The specific steps are as follows: open the "Settings" app.
1. Right-click "Computer", select Properties, click the "System Protection" tab after entering, and click "System Restore" in the "System Protection" interface just now. Click Next in the pop-up system restore prompt window.Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
2. How to operate the computer recovery system: Connect the computer to the power supply, and press or click the F10 key to enter the system recovery factory interface. Method 2: Connect the computer to the power supply. In the power-on state, open the Huawei Computer Butler, click more icons, and select the settings center system to restore the factory settings.
3. Open the "Settings" app. In Windows 10, you can open the Settings app by clicking the menu icon in the lower right corner or using the shortcut "Win I". In "Settings", click "Update and Security". In the "Update and Security" interface, click "Restore".
fourIf you want to restore the original system version after 10 days, or you have installed Windows 10 in other ways, you need to use installation media (such as USB flash drive or DVD) to reinstall the original system.
1. Click "System Restore" in the "Destructor System Protection" interface just now. Click Next in the pop-up system restore prompt window. Click to show more restore points, and you can also see the restore points automatically created by the system after the update.
2. No need for CD-ROM, USB disk to install the system, easy 5-step one-click restore system, can restore your operating system to the initial state (only restore the system disk, no operation on other disks.
3. Right-click on the desktop and select Personalization. Then click the control panel in the upper left corner. Just select the recovery. Click one of them to open the system and restore it. Finally, follow the operation steps to restore the system to complete.
4. Operation program: iso mirror 0 First, make the old Maotao boot USB disk according to the tutorial provided above, and then copy the original win10 system iso mirror image to the root directory of the old Maotao USB disk. Insert the USB flash drive into the computer, press F1F11 or Esc and other keys after restarting the computer, and select the USB flash drive option in the pop-up boot menu.
Industry-specific trade growth forecasts
author: 2024-12-23 22:57Industrial lubricants HS code classification
author: 2024-12-23 21:40Country-specific HS code duty reclaims
author: 2024-12-23 20:51How to interpret trade statistics
author: 2024-12-23 20:32Top international trade research methods
author: 2024-12-23 20:16How to use trade data for market expansion
author: 2024-12-23 22:22International trade law reference data
author: 2024-12-23 22:21Mineral fuels HS code data analysis
author: 2024-12-23 21:48Customized market entry reports
author: 2024-12-23 20:51346.89MB
Check213.24MB
Check748.34MB
Check564.44MB
Check464.73MB
Check662.49MB
Check429.99MB
Check284.91MB
Check942.67MB
Check441.23MB
Check482.16MB
Check862.81MB
Check388.47MB
Check116.12MB
Check329.65MB
Check249.21MB
Check935.44MB
Check845.34MB
Check165.83MB
Check342.13MB
Check628.72MB
Check598.58MB
Check918.26MB
Check649.52MB
Check254.23MB
Check876.28MB
Check297.72MB
Check618.65MB
Check876.79MB
Check235.87MB
Check584.24MB
Check354.42MB
Check399.43MB
Check157.64MB
Check199.64MB
Check174.48MB
CheckScan to install
Dynamic customs duty calculation to discover more
Netizen comments More
2054 HS code-based tariff calculations
2024-12-23 22:44 recommend
2989 How to comply with export licensing
2024-12-23 21:32 recommend
164 HS code-based vendor qualification
2024-12-23 21:30 recommend
360 Automotive supply chain HS code checks
2024-12-23 21:23 recommend
121 Furniture imports HS code analysis
2024-12-23 21:08 recommend