1. Secondly, the boiling point of antifreeze is above 120℃, while the boiling point of water is only 100℃. The use of antifreeze can prevent Love cars in summer.Finally, replacing antifreeze with water is easy to generate scale, so it needs to be replaced frequently, and there is no such concern when using antifreeze.
2. The brake fluid should not be too full. The maintenance mileage of the brake fluid is long, and it is usually checked after driving 50,000 kilometers to 20,000 kilometers. However, the liquid level of the brake fluid will decrease with the wear of the brake pad, and the external high temperature will also affect the brake fluid level. The amount of brake fluid will change according to the degree of wear of the brake pads.
3. Using antifreeze can prevent cars from "boiling" in summer. Finally, replacing antifreeze with water is easy to produce scale and needs to be replaced frequently, but using antifreeze does not have this problem.
4. Eight precautions for summer maintenance: (April, May, June, two o'clock every month) Protect the paint surface: the temperature rises in summer, the sun often explodes in the sun, and the paint of the car is obviously not good.It is recommended to make a layer of glaze or coating on the paint surface and apply a layer of "crystal protective clothing" on the paint surface.
It is more appropriate to refuel the car to 60% to 70% of the fuel tank capacity, which can not only reduce the weight of the vehicle, but also avoid the harm caused by full oil. The volume indicated by the fuel tank is not the actual maximum volume, but the maximum reasonable volume. Ordinary fuel tanks can add 10%~15% more diesel in addition to the marked volume.
If it's not summer, it can be filled up every time. If it's summer, add 3/4 each time. The fuel tank of the car is not completely sealed. There is a carbon tank in the fuel tank. When the pressure of the fuel tank is too high, the solenoid valve of the carbon tank opens so that the gasoline steam in the fuel tank is absorbed by the carbon tank.The fuel tank is generally made of plastic, and the fixed position of the fuel tank is generally close to the rear suspension.
If it's not in summer, you can fill it up every time. If it's summer, you can add 3/4 position at a time. The fuel tank of the car is not completely sealed. There is a carbon tank in the fuel tank. When the pressure of the fuel tank is too high, the solenoid valve of the carbon tank will open, so that the gasoline vapor in the fuel tank can be absorbed by the carbon tank.
Car manufacturers recommend that the capacity of the fuel tank is 60 liters. Considering the expansion coefficient of the oil, it is reasonable to store less than 60 liters of oil, which can provide enough empty space for fuel expansion caused by temperature rise and ensure the safety of the fuel tank during use. First of all, the accuracy of the fuel cannot be judged by the rated capacity of the fuel tank.
yuan, then it will cost about 345 yuan to fill up this fuel tank.Then we can just tell the gas station directly: "Please add 300 yuan of gasoline". Let's calculate: 300 yuan is just equivalent to the amount of about 45L of gasoline, which is about 90% of the total capacity of 50L. This is a completely reliable and safe amount of filling.
1. Choose oil according to the engine type. If you are a turbocharged engine, it is recommended to choose fully synthetic or semi-synthetic oil. Good fluidity is more conducive to engine heat dissipation; if you are a naturally aspirated engine, it is recommended to choose semi-synthetic or mineral oil.
2. How to choose the right oil How to choose the right car oil?The first thing to consider when choosing an oil is the viscosity of the oil. Choose the most appropriate one according to the viscosity of the oil required by the manufacturer. There is nothing more suitable than this. There are specific requirements in the general maintenance manual or instruction manual.
3. The method of selecting engine oil for car maintenance is as follows: choose engine oil produced by big brands or large factories: such as Shell, Mobil, Casto, Gartex, Total, BP, Shengpai, Fox, GS domestic big brands include Kunlun, Great Wall, Longpan.
*
Data-driven customs paperwork reduction-APP, download it now, new users will receive a novice gift pack.
1. Secondly, the boiling point of antifreeze is above 120℃, while the boiling point of water is only 100℃. The use of antifreeze can prevent Love cars in summer.Finally, replacing antifreeze with water is easy to generate scale, so it needs to be replaced frequently, and there is no such concern when using antifreeze.
2. The brake fluid should not be too full. The maintenance mileage of the brake fluid is long, and it is usually checked after driving 50,000 kilometers to 20,000 kilometers. However, the liquid level of the brake fluid will decrease with the wear of the brake pad, and the external high temperature will also affect the brake fluid level. The amount of brake fluid will change according to the degree of wear of the brake pads.
3. Using antifreeze can prevent cars from "boiling" in summer. Finally, replacing antifreeze with water is easy to produce scale and needs to be replaced frequently, but using antifreeze does not have this problem.
4. Eight precautions for summer maintenance: (April, May, June, two o'clock every month) Protect the paint surface: the temperature rises in summer, the sun often explodes in the sun, and the paint of the car is obviously not good.It is recommended to make a layer of glaze or coating on the paint surface and apply a layer of "crystal protective clothing" on the paint surface.
It is more appropriate to refuel the car to 60% to 70% of the fuel tank capacity, which can not only reduce the weight of the vehicle, but also avoid the harm caused by full oil. The volume indicated by the fuel tank is not the actual maximum volume, but the maximum reasonable volume. Ordinary fuel tanks can add 10%~15% more diesel in addition to the marked volume.
If it's not summer, it can be filled up every time. If it's summer, add 3/4 each time. The fuel tank of the car is not completely sealed. There is a carbon tank in the fuel tank. When the pressure of the fuel tank is too high, the solenoid valve of the carbon tank opens so that the gasoline steam in the fuel tank is absorbed by the carbon tank.The fuel tank is generally made of plastic, and the fixed position of the fuel tank is generally close to the rear suspension.
If it's not in summer, you can fill it up every time. If it's summer, you can add 3/4 position at a time. The fuel tank of the car is not completely sealed. There is a carbon tank in the fuel tank. When the pressure of the fuel tank is too high, the solenoid valve of the carbon tank will open, so that the gasoline vapor in the fuel tank can be absorbed by the carbon tank.
Car manufacturers recommend that the capacity of the fuel tank is 60 liters. Considering the expansion coefficient of the oil, it is reasonable to store less than 60 liters of oil, which can provide enough empty space for fuel expansion caused by temperature rise and ensure the safety of the fuel tank during use. First of all, the accuracy of the fuel cannot be judged by the rated capacity of the fuel tank.
yuan, then it will cost about 345 yuan to fill up this fuel tank.Then we can just tell the gas station directly: "Please add 300 yuan of gasoline". Let's calculate: 300 yuan is just equivalent to the amount of about 45L of gasoline, which is about 90% of the total capacity of 50L. This is a completely reliable and safe amount of filling.
1. Choose oil according to the engine type. If you are a turbocharged engine, it is recommended to choose fully synthetic or semi-synthetic oil. Good fluidity is more conducive to engine heat dissipation; if you are a naturally aspirated engine, it is recommended to choose semi-synthetic or mineral oil.
2. How to choose the right oil How to choose the right car oil?The first thing to consider when choosing an oil is the viscosity of the oil. Choose the most appropriate one according to the viscosity of the oil required by the manufacturer. There is nothing more suitable than this. There are specific requirements in the general maintenance manual or instruction manual.
3. The method of selecting engine oil for car maintenance is as follows: choose engine oil produced by big brands or large factories: such as Shell, Mobil, Casto, Gartex, Total, BP, Shengpai, Fox, GS domestic big brands include Kunlun, Great Wall, Longpan.
*
Import data for raw commodities
author: 2024-12-24 00:52How to comply with dual-use regulations
author: 2024-12-24 00:46How to adapt to shifting trade policies
author: 2024-12-24 00:38HS code-driven compliance workflows
author: 2024-12-24 00:07How to calculate landed costs accurately
author: 2024-12-24 01:25HS code consulting for exporters
author: 2024-12-24 01:01How to access restricted trade data
author: 2024-12-24 00:40Wine and spirits HS code verification
author: 2024-12-24 00:17Processed nuts HS code references
author: 2024-12-23 23:22747.98MB
Check178.11MB
Check984.28MB
Check797.31MB
Check551.57MB
Check794.41MB
Check752.14MB
Check341.88MB
Check221.63MB
Check236.74MB
Check456.76MB
Check551.67MB
Check588.94MB
Check936.66MB
Check841.95MB
Check224.23MB
Check317.31MB
Check414.24MB
Check288.71MB
Check374.72MB
Check296.29MB
Check368.11MB
Check212.11MB
Check424.62MB
Check828.41MB
Check335.95MB
Check418.27MB
Check444.88MB
Check891.81MB
Check661.71MB
Check435.51MB
Check919.98MB
Check714.67MB
Check457.26MB
Check965.25MB
Check333.33MB
CheckScan to install
Data-driven customs paperwork reduction to discover more
Netizen comments More
942 Apparel import export statistics
2024-12-24 01:22 recommend
1752 How to build a resilient supply chain
2024-12-24 01:17 recommend
1325 Trade data visualization dashboards
2024-12-24 00:55 recommend
1406 How to track competitor import export data
2024-12-24 00:12 recommend
2196 Deriving product origin via HS code
2024-12-23 23:04 recommend