1. Good. The Hyundai Verner 2013 6 engine is an economical engine. It is a first-line brand in China with a good reputation. In terms of characteristics. The Hyundai Verner 2013 6 engine has the characteristics of good reliability, light weight, good quality and easy installation. It has a longer service life than ordinary engines, which is ten years.
The most likely time is when the engine is hot, cold or lacks oil. Check whether the air filter is dirty, whether the spark plug is old and needs to be replaced, whether the ignition coil is broken, and whether the gasoline is clean, such as water in the oil line. Check the oil pump.
The most common reason for the abnormal noise of car shaking is that the throttle valve is too dirty or the fuel injector accumulates too much carbon. It is necessary to clean up the engine carbon, wash the throttle valve, change the oil pad and spark plug, etc. If you still find abnormal shaking after cleaning, it is recommended to go to the 4S store to check whether the fuel supply pressure and intake pressure sensor are normal.
The reasons for the abnormal noise of Hyundai's leading engine are as follows: The most common reason for the abnormal noise of car vibration is that the throttle valve is too dirty or the oil nozzle accumulates too much carbon.It is necessary to clean up the engine carbon, clean the throttle valve, replace the oil pads and spark plugs, etc. If there is still abnormal vibration after cleaning, it is recommended to go to the 4S store to check whether the oil supply pressure and intake pressure sensor are normal.
It may be that there is a problem with the oil or a problem with the oil circulation system and filter to reduce the lubrication effect, so that the engine is loud. The solution is to add oil to the inside of the engine for lubrication. Analysis of the specific reasons for the loud engine noise: 1. Step on the accelerator, and the engine has a hysterical sound.
1. It is worth mentioning that although the engine is more powerful, according toAccording to the official introduction, under the same WLTC conditions, it has become more fuel-efficient. The old model is 2L, 5L/100km, and the Dihao champion is 682L/100km.
2. Yuedong 16l engine is different from Lingdong. The maximum power of the engine is different. The maximum torque of the engine is different. First, the type of engine is different. 1 Yuedong 16 αCVVT engine 2. The maximum power of the second engine is different. 1 Yuedong.
3. In terms of the power system, the Geely Emgrand Champion Edition is equipped with a new 5L four-cylinder engine, which adopts in-cylinder direct injection technology. Compared with the current model, the maximum power is increased by 9kW, the maximum horsepower is increased by 13Ps, reaching 93kW (127Ps), and the maximum torque is increased by 5N·m. To 152N·m.
4. In terms of power, the Geely Emgrand Champion Edition continues to provide two models: manual transmission and automatic transmission. The new car is still equipped with a 5L naturally aspirated engine, but the maximum power is increased to 127 horsepower (114 horsepower in the old model), and the peak torque is 152 Nm (the old model is 147 Nm) .
5. Hyundai Leading 19 gearboxes are not bad 1 Beijing Hyundai Leading model equipped with a 14t turbocharged engine model uses a manual automatic dual-clutch gearbox, but the Hyundai Leading model with a 16l naturally aspirated engine is a six-speed manual automatic integrated at gearbox, not a dual-clutch 2 In terms of power, it is equipped with a 14T turbocharger.
6. In this respect, the performance leadership is also superior to that of the emperor. Leading 6LGDI engine + 6-speed manual automatic transmission, power output of 130Ps/157N·m.The maximum power is 93kw, and the maximum speed is 6300rpm. The maximum torque speed is 4500rpm.
1. Reasons for burning engine oil: not effective cleaning of the oil line for a long time, the antifreeze is not replaced in time, and the oil use cycle is too long. Long-term short-distance driving. The car that burns engine oil must occupy one or all four points. Please take your seat with the number.
2. Third, the piston ring is blocked. It is also the most common reason for burning oil in this kind of engine. 10 cars burning oil and 9 cars are directly related to this blockage.
3. Most of the oil burned by Hyundai Tucson is caused by the stagnation of the piston ring.Relying on the addition of high-viscosity oil to prolong life is just an expedient measure to treat the change but not the root cause. The poor power and high fuel consumption of the engine are due to the fact that the oil participates in combustion to form more carbon accumulation, and the carbon accumulation aggravates the degree of oil burning to form a vicious circle.
4. As long as it is maintained on time, it will not burn oil [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.
5. Wear between the piston and the cylinder wall. The valve seal is corrosion-aging and the sealing performance is invalid. In addition, there is a crankcase ventilation system (exhaust valve) in the car now. If there is a problem, it will also increase the consumption of oil. Burning oil means that the oil enters the combustion chamber of the engine and participates in the combustion together with the mixed gas.
6. It's possible that I haven't driven for a long time and suddenly feel that the engine is a little idle.Shaking, so I went straight to Tuhu for a detailed inspection. After some inspection, there was no big problem with all aspects of the accessories. The endoscope opened the combustion chamber and accumulated a lot of carbon. It was suspected that the piston was stuck burning the oil. To solve this problem, it can only be solved by disassembling the engine.
Trade data for metal commodities-APP, download it now, new users will receive a novice gift pack.
1. Good. The Hyundai Verner 2013 6 engine is an economical engine. It is a first-line brand in China with a good reputation. In terms of characteristics. The Hyundai Verner 2013 6 engine has the characteristics of good reliability, light weight, good quality and easy installation. It has a longer service life than ordinary engines, which is ten years.
The most likely time is when the engine is hot, cold or lacks oil. Check whether the air filter is dirty, whether the spark plug is old and needs to be replaced, whether the ignition coil is broken, and whether the gasoline is clean, such as water in the oil line. Check the oil pump.
The most common reason for the abnormal noise of car shaking is that the throttle valve is too dirty or the fuel injector accumulates too much carbon. It is necessary to clean up the engine carbon, wash the throttle valve, change the oil pad and spark plug, etc. If you still find abnormal shaking after cleaning, it is recommended to go to the 4S store to check whether the fuel supply pressure and intake pressure sensor are normal.
The reasons for the abnormal noise of Hyundai's leading engine are as follows: The most common reason for the abnormal noise of car vibration is that the throttle valve is too dirty or the oil nozzle accumulates too much carbon.It is necessary to clean up the engine carbon, clean the throttle valve, replace the oil pads and spark plugs, etc. If there is still abnormal vibration after cleaning, it is recommended to go to the 4S store to check whether the oil supply pressure and intake pressure sensor are normal.
It may be that there is a problem with the oil or a problem with the oil circulation system and filter to reduce the lubrication effect, so that the engine is loud. The solution is to add oil to the inside of the engine for lubrication. Analysis of the specific reasons for the loud engine noise: 1. Step on the accelerator, and the engine has a hysterical sound.
1. It is worth mentioning that although the engine is more powerful, according toAccording to the official introduction, under the same WLTC conditions, it has become more fuel-efficient. The old model is 2L, 5L/100km, and the Dihao champion is 682L/100km.
2. Yuedong 16l engine is different from Lingdong. The maximum power of the engine is different. The maximum torque of the engine is different. First, the type of engine is different. 1 Yuedong 16 αCVVT engine 2. The maximum power of the second engine is different. 1 Yuedong.
3. In terms of the power system, the Geely Emgrand Champion Edition is equipped with a new 5L four-cylinder engine, which adopts in-cylinder direct injection technology. Compared with the current model, the maximum power is increased by 9kW, the maximum horsepower is increased by 13Ps, reaching 93kW (127Ps), and the maximum torque is increased by 5N·m. To 152N·m.
4. In terms of power, the Geely Emgrand Champion Edition continues to provide two models: manual transmission and automatic transmission. The new car is still equipped with a 5L naturally aspirated engine, but the maximum power is increased to 127 horsepower (114 horsepower in the old model), and the peak torque is 152 Nm (the old model is 147 Nm) .
5. Hyundai Leading 19 gearboxes are not bad 1 Beijing Hyundai Leading model equipped with a 14t turbocharged engine model uses a manual automatic dual-clutch gearbox, but the Hyundai Leading model with a 16l naturally aspirated engine is a six-speed manual automatic integrated at gearbox, not a dual-clutch 2 In terms of power, it is equipped with a 14T turbocharger.
6. In this respect, the performance leadership is also superior to that of the emperor. Leading 6LGDI engine + 6-speed manual automatic transmission, power output of 130Ps/157N·m.The maximum power is 93kw, and the maximum speed is 6300rpm. The maximum torque speed is 4500rpm.
1. Reasons for burning engine oil: not effective cleaning of the oil line for a long time, the antifreeze is not replaced in time, and the oil use cycle is too long. Long-term short-distance driving. The car that burns engine oil must occupy one or all four points. Please take your seat with the number.
2. Third, the piston ring is blocked. It is also the most common reason for burning oil in this kind of engine. 10 cars burning oil and 9 cars are directly related to this blockage.
3. Most of the oil burned by Hyundai Tucson is caused by the stagnation of the piston ring.Relying on the addition of high-viscosity oil to prolong life is just an expedient measure to treat the change but not the root cause. The poor power and high fuel consumption of the engine are due to the fact that the oil participates in combustion to form more carbon accumulation, and the carbon accumulation aggravates the degree of oil burning to form a vicious circle.
4. As long as it is maintained on time, it will not burn oil [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.
5. Wear between the piston and the cylinder wall. The valve seal is corrosion-aging and the sealing performance is invalid. In addition, there is a crankcase ventilation system (exhaust valve) in the car now. If there is a problem, it will also increase the consumption of oil. Burning oil means that the oil enters the combustion chamber of the engine and participates in the combustion together with the mixed gas.
6. It's possible that I haven't driven for a long time and suddenly feel that the engine is a little idle.Shaking, so I went straight to Tuhu for a detailed inspection. After some inspection, there was no big problem with all aspects of the accessories. The endoscope opened the combustion chamber and accumulated a lot of carbon. It was suspected that the piston was stuck burning the oil. To solve this problem, it can only be solved by disassembling the engine.
Trade flow analysis by HS code category
author: 2024-12-24 01:02Global trade resource libraries
author: 2024-12-24 00:56Advanced HS code product classification
author: 2024-12-24 00:27Advanced shipment analytics software
author: 2024-12-23 23:49Trade data integration with ERP systems
author: 2024-12-23 23:41HS code-based forecasting for exports
author: 2024-12-24 00:26HS code-based segment analysis for FMCG
author: 2024-12-24 00:17Ship parts HS code verification
author: 2024-12-24 00:03Global trade compliance automation suites
author: 2024-12-23 23:00222.27MB
Check817.53MB
Check497.75MB
Check547.81MB
Check589.71MB
Check193.57MB
Check967.49MB
Check932.24MB
Check387.74MB
Check587.98MB
Check819.91MB
Check857.25MB
Check335.71MB
Check969.63MB
Check758.55MB
Check881.83MB
Check543.65MB
Check757.31MB
Check538.37MB
Check123.41MB
Check873.39MB
Check139.89MB
Check831.23MB
Check565.49MB
Check185.62MB
Check372.84MB
Check469.35MB
Check612.73MB
Check796.41MB
Check565.35MB
Check836.41MB
Check955.38MB
Check633.37MB
Check991.97MB
Check571.27MB
Check189.71MB
CheckScan to install
Trade data for metal commodities to discover more
Netizen comments More
524 Predictive models for trade demand
2024-12-24 01:04 recommend
1255 Trade data-driven market penetration
2024-12-24 00:40 recommend
1567 Trade data for food and beverage industry
2024-12-23 23:55 recommend
1231 Supplier risk profiling with trade data
2024-12-23 23:41 recommend
248 International trade event forecasts
2024-12-23 23:13 recommend