The problem is caused by the oxidation of the memory stick or the gold finger of the graphics card or the poor contact of the slot, which leads to the inability to turn on the computer.
Restart the computer: Try to simply restart the computer. Sometimes, the system may encounter temporary problems, which can be solved by restarting.Check the hardware connection: make sure that all hardware devices (such as keyboards, mice, monitors, etc.) are connected correctly. Sometimes, incorrect hardware connections may cause the computer to fail to start.
It can't be turned on. There are too many reasons. Memory, hard disk, motherboard and other hardware are all possible. The system boot damage will also be the same. You can troubleshoot it yourself. It's not all about finding someone to check for you. As long as the hardware is not broken, the system will be reinstalled at worst.
If you can enter the safe mode smoothly, you can solve the reason why you can't enter the desktop by checking and fixing the problem. Restore/repair the system: If the above method is not effective, you can try to use the recovery function pre-installed on the computer (such as restoring partition or restoring CD).
Suspect that the power supply is faulty, replace the original power supply with a good power supply, and then turn on the power test. The display appears a power-on screen, confirming that it is a power failure.After replacing an ATX power supply, install the operating system and use the test software to copy the machine for testing. Everything is normal and troubleshooting.
1. If the method cannot solve it, we can enter the safe mode to restore the system.
2. Then run the anti-virus software. If there is a virus, it may be caused by the virus. Restart the computer after the antivirus. If it is still abnormal, you need to reinstall the operating system.
3. In this case, the system upgrade file may be damaged and the system upgrade failed. You can start up and press f9 or f10 to enter the recovery mode to restore to before the upgrade, or restore to the factory settings.
4. The computer model is different. After entering, there are 2 kinds of recovery modes. One is to associate your own, which is very simple. Just choose to reset.
5. Solution Press f2 to enter bios when booting, and then enter the boot menu and set your hard disk as the first boot item. In addition, this situation is a hardware problem. You can turn on the computer host after cleaning the dust.
6. The laptop can't enter the system when it is turned on. You can try to eliminate viruses and Trojan horses in the following ways. You can use anti-virus software to check the computer's anti-virus! Check the temperature of the CPU and graphics card. If the temperature of the CPU and graphics card is too high, it often causes a protective automatic restart. Dust the fan, oil or replace the new fan.
CD-ROM installation of reinstalling the system: This is what many friends often do when they can't enter the computer. Of course, the premise is that you must have an optical drive and an installation CD-ROM.
Then run the anti-virus software. If there is a virus, it may be caused by a virus. After the antivirus, restart the computer. If it is not normal, you need to reinstall the operating system.
It is recommended to press F8 to enter the safe mode to see if you can enter the safe mode. If you can enter the safe mode, it is recommended to uninstall the previously installed software or update, check the virus, update the driver, and turn off the unused boot item test. If you can't enter the safe mode to restore the default settings of bios, it is recommended to enter the bios to restore the default settings test.
China HS code interpretation guide-APP, download it now, new users will receive a novice gift pack.
The problem is caused by the oxidation of the memory stick or the gold finger of the graphics card or the poor contact of the slot, which leads to the inability to turn on the computer.
Restart the computer: Try to simply restart the computer. Sometimes, the system may encounter temporary problems, which can be solved by restarting.Check the hardware connection: make sure that all hardware devices (such as keyboards, mice, monitors, etc.) are connected correctly. Sometimes, incorrect hardware connections may cause the computer to fail to start.
It can't be turned on. There are too many reasons. Memory, hard disk, motherboard and other hardware are all possible. The system boot damage will also be the same. You can troubleshoot it yourself. It's not all about finding someone to check for you. As long as the hardware is not broken, the system will be reinstalled at worst.
If you can enter the safe mode smoothly, you can solve the reason why you can't enter the desktop by checking and fixing the problem. Restore/repair the system: If the above method is not effective, you can try to use the recovery function pre-installed on the computer (such as restoring partition or restoring CD).
Suspect that the power supply is faulty, replace the original power supply with a good power supply, and then turn on the power test. The display appears a power-on screen, confirming that it is a power failure.After replacing an ATX power supply, install the operating system and use the test software to copy the machine for testing. Everything is normal and troubleshooting.
1. If the method cannot solve it, we can enter the safe mode to restore the system.
2. Then run the anti-virus software. If there is a virus, it may be caused by the virus. Restart the computer after the antivirus. If it is still abnormal, you need to reinstall the operating system.
3. In this case, the system upgrade file may be damaged and the system upgrade failed. You can start up and press f9 or f10 to enter the recovery mode to restore to before the upgrade, or restore to the factory settings.
4. The computer model is different. After entering, there are 2 kinds of recovery modes. One is to associate your own, which is very simple. Just choose to reset.
5. Solution Press f2 to enter bios when booting, and then enter the boot menu and set your hard disk as the first boot item. In addition, this situation is a hardware problem. You can turn on the computer host after cleaning the dust.
6. The laptop can't enter the system when it is turned on. You can try to eliminate viruses and Trojan horses in the following ways. You can use anti-virus software to check the computer's anti-virus! Check the temperature of the CPU and graphics card. If the temperature of the CPU and graphics card is too high, it often causes a protective automatic restart. Dust the fan, oil or replace the new fan.
CD-ROM installation of reinstalling the system: This is what many friends often do when they can't enter the computer. Of course, the premise is that you must have an optical drive and an installation CD-ROM.
Then run the anti-virus software. If there is a virus, it may be caused by a virus. After the antivirus, restart the computer. If it is not normal, you need to reinstall the operating system.
It is recommended to press F8 to enter the safe mode to see if you can enter the safe mode. If you can enter the safe mode, it is recommended to uninstall the previously installed software or update, check the virus, update the driver, and turn off the unused boot item test. If you can't enter the safe mode to restore the default settings of bios, it is recommended to enter the bios to restore the default settings test.
Trade data-driven credit insurance
author: 2024-12-23 21:46HS code monitoring tools for exporters
author: 2024-12-23 21:13How to interpret trade volume changes
author: 2024-12-23 21:13Processed meat HS code verification
author: 2024-12-23 20:27How to simplify export documentation
author: 2024-12-23 20:14Real-time supply chain financing insights
author: 2024-12-23 22:39Data-driven multimodal transport decisions
author: 2024-12-23 22:11Real-time customs duty updates
author: 2024-12-23 20:22447.28MB
Check233.61MB
Check783.91MB
Check571.97MB
Check622.23MB
Check825.64MB
Check796.21MB
Check625.99MB
Check478.87MB
Check186.46MB
Check763.82MB
Check765.84MB
Check518.59MB
Check342.37MB
Check822.37MB
Check649.77MB
Check582.94MB
Check431.47MB
Check966.53MB
Check716.39MB
Check336.14MB
Check195.22MB
Check551.18MB
Check567.11MB
Check478.71MB
Check573.13MB
Check594.36MB
Check992.74MB
Check454.91MB
Check952.77MB
Check262.42MB
Check348.35MB
Check577.39MB
Check435.23MB
Check912.31MB
Check293.87MB
CheckScan to install
China HS code interpretation guide to discover more
Netizen comments More
936 HS code-focused compliance audits
2024-12-23 22:44 recommend
1897 Electronics supply chain intelligence
2024-12-23 22:41 recommend
596 Bulk grain HS code insights
2024-12-23 21:55 recommend
1326 Maritime logistics HS code mapping
2024-12-23 21:52 recommend
459 Electronics supply chain intelligence
2024-12-23 20:56 recommend