1. Good. The Hyundai Verner 2013 6 engine is an economical engine. It is a first-line brand in China with a good reputation. In terms of characteristics. The Hyundai Verner 2013 6 engine has the characteristics of good reliability, light weight, good quality and easy installation. It has a longer service life than ordinary engines, which is ten years.
The most likely time is when the engine is hot, cold or lacks oil. Check whether the air filter is dirty, whether the spark plug is old and needs to be replaced, whether the ignition coil is broken, and whether the gasoline is clean, such as water in the oil line. Check the oil pump.
The most common reason for the abnormal noise of car shaking is that the throttle valve is too dirty or the fuel injector accumulates too much carbon. It is necessary to clean up the engine carbon, wash the throttle valve, change the oil pad and spark plug, etc. If you still find abnormal shaking after cleaning, it is recommended to go to the 4S store to check whether the fuel supply pressure and intake pressure sensor are normal.
The reasons for the abnormal noise of Hyundai's leading engine are as follows: The most common reason for the abnormal noise of car vibration is that the throttle valve is too dirty or the oil nozzle accumulates too much carbon.It is necessary to clean up the engine carbon, clean the throttle valve, replace the oil pads and spark plugs, etc. If there is still abnormal vibration after cleaning, it is recommended to go to the 4S store to check whether the oil supply pressure and intake pressure sensor are normal.
It may be that there is a problem with the oil or a problem with the oil circulation system and filter to reduce the lubrication effect, so that the engine is loud. The solution is to add oil to the inside of the engine for lubrication. Analysis of the specific reasons for the loud engine noise: 1. Step on the accelerator, and the engine has a hysterical sound.
1. It is worth mentioning that although the engine is more powerful, according toAccording to the official introduction, under the same WLTC conditions, it has become more fuel-efficient. The old model is 2L, 5L/100km, and the Dihao champion is 682L/100km.
2. Yuedong 16l engine is different from Lingdong. The maximum power of the engine is different. The maximum torque of the engine is different. First, the type of engine is different. 1 Yuedong 16 αCVVT engine 2. The maximum power of the second engine is different. 1 Yuedong.
3. In terms of the power system, the Geely Emgrand Champion Edition is equipped with a new 5L four-cylinder engine, which adopts in-cylinder direct injection technology. Compared with the current model, the maximum power is increased by 9kW, the maximum horsepower is increased by 13Ps, reaching 93kW (127Ps), and the maximum torque is increased by 5N·m. To 152N·m.
4. In terms of power, the Geely Emgrand Champion Edition continues to provide two models: manual transmission and automatic transmission. The new car is still equipped with a 5L naturally aspirated engine, but the maximum power is increased to 127 horsepower (114 horsepower in the old model), and the peak torque is 152 Nm (the old model is 147 Nm) .
5. Hyundai Leading 19 gearboxes are not bad 1 Beijing Hyundai Leading model equipped with a 14t turbocharged engine model uses a manual automatic dual-clutch gearbox, but the Hyundai Leading model with a 16l naturally aspirated engine is a six-speed manual automatic integrated at gearbox, not a dual-clutch 2 In terms of power, it is equipped with a 14T turbocharger.
6. In this respect, the performance leadership is also superior to that of the emperor. Leading 6LGDI engine + 6-speed manual automatic transmission, power output of 130Ps/157N·m.The maximum power is 93kw, and the maximum speed is 6300rpm. The maximum torque speed is 4500rpm.
1. Reasons for burning engine oil: not effective cleaning of the oil line for a long time, the antifreeze is not replaced in time, and the oil use cycle is too long. Long-term short-distance driving. The car that burns engine oil must occupy one or all four points. Please take your seat with the number.
2. Third, the piston ring is blocked. It is also the most common reason for burning oil in this kind of engine. 10 cars burning oil and 9 cars are directly related to this blockage.
3. Most of the oil burned by Hyundai Tucson is caused by the stagnation of the piston ring.Relying on the addition of high-viscosity oil to prolong life is just an expedient measure to treat the change but not the root cause. The poor power and high fuel consumption of the engine are due to the fact that the oil participates in combustion to form more carbon accumulation, and the carbon accumulation aggravates the degree of oil burning to form a vicious circle.
4. As long as it is maintained on time, it will not burn oil [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.
5. Wear between the piston and the cylinder wall. The valve seal is corrosion-aging and the sealing performance is invalid. In addition, there is a crankcase ventilation system (exhaust valve) in the car now. If there is a problem, it will also increase the consumption of oil. Burning oil means that the oil enters the combustion chamber of the engine and participates in the combustion together with the mixed gas.
6. It's possible that I haven't driven for a long time and suddenly feel that the engine is a little idle.Shaking, so I went straight to Tuhu for a detailed inspection. After some inspection, there was no big problem with all aspects of the accessories. The endoscope opened the combustion chamber and accumulated a lot of carbon. It was suspected that the piston was stuck burning the oil. To solve this problem, it can only be solved by disassembling the engine.
Trade data for import tariff planning-APP, download it now, new users will receive a novice gift pack.
1. Good. The Hyundai Verner 2013 6 engine is an economical engine. It is a first-line brand in China with a good reputation. In terms of characteristics. The Hyundai Verner 2013 6 engine has the characteristics of good reliability, light weight, good quality and easy installation. It has a longer service life than ordinary engines, which is ten years.
The most likely time is when the engine is hot, cold or lacks oil. Check whether the air filter is dirty, whether the spark plug is old and needs to be replaced, whether the ignition coil is broken, and whether the gasoline is clean, such as water in the oil line. Check the oil pump.
The most common reason for the abnormal noise of car shaking is that the throttle valve is too dirty or the fuel injector accumulates too much carbon. It is necessary to clean up the engine carbon, wash the throttle valve, change the oil pad and spark plug, etc. If you still find abnormal shaking after cleaning, it is recommended to go to the 4S store to check whether the fuel supply pressure and intake pressure sensor are normal.
The reasons for the abnormal noise of Hyundai's leading engine are as follows: The most common reason for the abnormal noise of car vibration is that the throttle valve is too dirty or the oil nozzle accumulates too much carbon.It is necessary to clean up the engine carbon, clean the throttle valve, replace the oil pads and spark plugs, etc. If there is still abnormal vibration after cleaning, it is recommended to go to the 4S store to check whether the oil supply pressure and intake pressure sensor are normal.
It may be that there is a problem with the oil or a problem with the oil circulation system and filter to reduce the lubrication effect, so that the engine is loud. The solution is to add oil to the inside of the engine for lubrication. Analysis of the specific reasons for the loud engine noise: 1. Step on the accelerator, and the engine has a hysterical sound.
1. It is worth mentioning that although the engine is more powerful, according toAccording to the official introduction, under the same WLTC conditions, it has become more fuel-efficient. The old model is 2L, 5L/100km, and the Dihao champion is 682L/100km.
2. Yuedong 16l engine is different from Lingdong. The maximum power of the engine is different. The maximum torque of the engine is different. First, the type of engine is different. 1 Yuedong 16 αCVVT engine 2. The maximum power of the second engine is different. 1 Yuedong.
3. In terms of the power system, the Geely Emgrand Champion Edition is equipped with a new 5L four-cylinder engine, which adopts in-cylinder direct injection technology. Compared with the current model, the maximum power is increased by 9kW, the maximum horsepower is increased by 13Ps, reaching 93kW (127Ps), and the maximum torque is increased by 5N·m. To 152N·m.
4. In terms of power, the Geely Emgrand Champion Edition continues to provide two models: manual transmission and automatic transmission. The new car is still equipped with a 5L naturally aspirated engine, but the maximum power is increased to 127 horsepower (114 horsepower in the old model), and the peak torque is 152 Nm (the old model is 147 Nm) .
5. Hyundai Leading 19 gearboxes are not bad 1 Beijing Hyundai Leading model equipped with a 14t turbocharged engine model uses a manual automatic dual-clutch gearbox, but the Hyundai Leading model with a 16l naturally aspirated engine is a six-speed manual automatic integrated at gearbox, not a dual-clutch 2 In terms of power, it is equipped with a 14T turbocharger.
6. In this respect, the performance leadership is also superior to that of the emperor. Leading 6LGDI engine + 6-speed manual automatic transmission, power output of 130Ps/157N·m.The maximum power is 93kw, and the maximum speed is 6300rpm. The maximum torque speed is 4500rpm.
1. Reasons for burning engine oil: not effective cleaning of the oil line for a long time, the antifreeze is not replaced in time, and the oil use cycle is too long. Long-term short-distance driving. The car that burns engine oil must occupy one or all four points. Please take your seat with the number.
2. Third, the piston ring is blocked. It is also the most common reason for burning oil in this kind of engine. 10 cars burning oil and 9 cars are directly related to this blockage.
3. Most of the oil burned by Hyundai Tucson is caused by the stagnation of the piston ring.Relying on the addition of high-viscosity oil to prolong life is just an expedient measure to treat the change but not the root cause. The poor power and high fuel consumption of the engine are due to the fact that the oil participates in combustion to form more carbon accumulation, and the carbon accumulation aggravates the degree of oil burning to form a vicious circle.
4. As long as it is maintained on time, it will not burn oil [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.
5. Wear between the piston and the cylinder wall. The valve seal is corrosion-aging and the sealing performance is invalid. In addition, there is a crankcase ventilation system (exhaust valve) in the car now. If there is a problem, it will also increase the consumption of oil. Burning oil means that the oil enters the combustion chamber of the engine and participates in the combustion together with the mixed gas.
6. It's possible that I haven't driven for a long time and suddenly feel that the engine is a little idle.Shaking, so I went straight to Tuhu for a detailed inspection. After some inspection, there was no big problem with all aspects of the accessories. The endoscope opened the combustion chamber and accumulated a lot of carbon. It was suspected that the piston was stuck burning the oil. To solve this problem, it can only be solved by disassembling the engine.
Import data for raw commodities
author: 2024-12-23 22:06HS code-based vendor qualification
author: 2024-12-23 21:55Global trade supply chain modeling
author: 2024-12-23 21:12HS code alignment with import quotas
author: 2024-12-23 20:16How to reduce import export costs
author: 2024-12-23 20:16Global trade scenario planning
author: 2024-12-23 22:33HS code-based commodity chain analysis
author: 2024-12-23 21:36HS code-led regulatory frameworks
author: 2024-12-23 20:50Predictive supplier scoring algorithms
author: 2024-12-23 20:44111.15MB
Check525.71MB
Check929.97MB
Check879.52MB
Check595.67MB
Check295.35MB
Check389.96MB
Check188.51MB
Check659.71MB
Check482.13MB
Check961.36MB
Check892.13MB
Check923.66MB
Check288.55MB
Check886.32MB
Check256.63MB
Check637.79MB
Check139.63MB
Check655.95MB
Check213.97MB
Check692.83MB
Check488.58MB
Check882.33MB
Check844.38MB
Check928.73MB
Check914.38MB
Check875.24MB
Check372.15MB
Check785.94MB
Check561.24MB
Check857.43MB
Check152.21MB
Check197.56MB
Check557.41MB
Check559.95MB
Check769.47MB
CheckScan to install
Trade data for import tariff planning to discover more
Netizen comments More
2899 HS code metrics for performance dashboards
2024-12-23 22:07 recommend
192 Premium trade data intelligence subscriptions
2024-12-23 21:21 recommend
1972 Supplier onboarding with data analytics
2024-12-23 20:25 recommend
2689 Real-time embargo monitoring
2024-12-23 20:07 recommend
2819 Raw tobacco HS code tracking
2024-12-23 19:54 recommend