1. The engine displacement is 2,300 ml, the maximum power can reach 107 kilowatts, and the maximum speed is 130 kilometers per hour. The transmission types available for Iveco Osheng are manual transmission (MT) and automatic transmission (AT), and the warranty of the whole vehicle is three years or 100,000 kilometers.
2. Iveco Juxing is equipped with a diesel engine with a maximum power of 170 horsepower, a peak torque of 430 Nm, and a displacement of 0L. The engine adopts advanced fuel injection technology.Technology and turbocharging technology has high fuel economy and power performance, which can meet the daily needs of commercial vehicles.
3. The output power range of the SC4H electronically controlled national four engine is 105-132KW, with 170 horsepower and 600N.m of torque. The maximum torque speed can reach 1200-1600rpm, and the full-load minimum fuel consumption rate is only 192g/kW.h, each The parameters and indicators are all at the leading level in China.
1. Iveco engine is the world-famous Sofim f1c engine, which is not only powerful, but also fuel-efficient. Compared with similar cars, it can save 5-10 liters of fuel per 100 kilometers, and can save more than 20,000 yuan a year.
2. Fiat diesel engine. The diesel engine is characterized by a large torque but a low speed. The gasoline engine has high speed and low torque. Installing a diesel engine on the truck can get greater horsepower and lower fuel consumption. The characteristics of low speed and high torque of diesel engines are more suitable for high-load trucks.
3. There are two main types, sofim engine, Italian technology, which has been fully domesticated and produced in Nanjing; another is the F1C engine, which is currently assembled by Shangfeihong in Chongqing imported CKD from Italy. F1C should have better performance. Both of these engines are diesel engines.
4. Among them, IVECO F1C is an engine independently developed by Ifco, with a displacement of 3 liters or 0 liters, which is available for customers to choose from. In otherIn the market, such as South America, the Middle East and Africa, Iveco Podi may use engines from other manufacturers, such as Cummins and Navistar.
5. Iveco F1a engine is the latest generation of diesel power products developed by Fiat Power Technology (FPT). The power of the F1A engine can reach 93KW, the noise is reduced to 72dB, and the minimum fuel consumption of the external characteristics of the engine is 205g/kWh; its net mass is only 247kg.
6. Sofim engine, Italian technology. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard.
There are two main types, sofim engine, Italian technology, which has been fully localized and produced in Nanjing; and one The species is an F1C engine, which is currently assembled by Chongqing's Shangfeihong imported CKD from Italy. F1C should have better performance. Both of these engines are diesel engines.
Fiat diesel engine. The diesel engine is characterized by a large torque but a low speed. The gasoline engine has high speed and low torque. Installing a diesel engine on the truck can get greater horsepower and lower fuel consumption. The characteristics of low speed and high torque of diesel engines are more suitable for high-load trucks.
Iveco models are mainly diesel engines.The following is relevant information about diesel: Diesel is a mixture of light petroleum products and complex hydrocarbons (about 10~22 carbon atoms) and is the fuel of diesel engines. The boiling point range and viscosity of diesel are between kerosene and lubricating oil. Flammable, insoluble in water, soluble in alcohol and other organic solvents.
Sophiem engine, Italian technology. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard.
Iveco models are mainly diesel engines. There are also gasoline engine models to choose from. Most of the DMV models give Iveco yellow license plates and rarely blue license plates. The Iveco engine is in the front, but the diesel is noisy.
Hello, Iveco models are mainly diesel engines. There is also a gasoline engine. The most used is Sophia, and some special models use imported F1C. Common models are usually Sophim's. The Iveco engine is in the front, the front is short, and the diesel engine is relatively noisy.
International trade KPI tracking-APP, download it now, new users will receive a novice gift pack.
1. The engine displacement is 2,300 ml, the maximum power can reach 107 kilowatts, and the maximum speed is 130 kilometers per hour. The transmission types available for Iveco Osheng are manual transmission (MT) and automatic transmission (AT), and the warranty of the whole vehicle is three years or 100,000 kilometers.
2. Iveco Juxing is equipped with a diesel engine with a maximum power of 170 horsepower, a peak torque of 430 Nm, and a displacement of 0L. The engine adopts advanced fuel injection technology.Technology and turbocharging technology has high fuel economy and power performance, which can meet the daily needs of commercial vehicles.
3. The output power range of the SC4H electronically controlled national four engine is 105-132KW, with 170 horsepower and 600N.m of torque. The maximum torque speed can reach 1200-1600rpm, and the full-load minimum fuel consumption rate is only 192g/kW.h, each The parameters and indicators are all at the leading level in China.
1. Iveco engine is the world-famous Sofim f1c engine, which is not only powerful, but also fuel-efficient. Compared with similar cars, it can save 5-10 liters of fuel per 100 kilometers, and can save more than 20,000 yuan a year.
2. Fiat diesel engine. The diesel engine is characterized by a large torque but a low speed. The gasoline engine has high speed and low torque. Installing a diesel engine on the truck can get greater horsepower and lower fuel consumption. The characteristics of low speed and high torque of diesel engines are more suitable for high-load trucks.
3. There are two main types, sofim engine, Italian technology, which has been fully domesticated and produced in Nanjing; another is the F1C engine, which is currently assembled by Shangfeihong in Chongqing imported CKD from Italy. F1C should have better performance. Both of these engines are diesel engines.
4. Among them, IVECO F1C is an engine independently developed by Ifco, with a displacement of 3 liters or 0 liters, which is available for customers to choose from. In otherIn the market, such as South America, the Middle East and Africa, Iveco Podi may use engines from other manufacturers, such as Cummins and Navistar.
5. Iveco F1a engine is the latest generation of diesel power products developed by Fiat Power Technology (FPT). The power of the F1A engine can reach 93KW, the noise is reduced to 72dB, and the minimum fuel consumption of the external characteristics of the engine is 205g/kWh; its net mass is only 247kg.
6. Sofim engine, Italian technology. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard.
There are two main types, sofim engine, Italian technology, which has been fully localized and produced in Nanjing; and one The species is an F1C engine, which is currently assembled by Chongqing's Shangfeihong imported CKD from Italy. F1C should have better performance. Both of these engines are diesel engines.
Fiat diesel engine. The diesel engine is characterized by a large torque but a low speed. The gasoline engine has high speed and low torque. Installing a diesel engine on the truck can get greater horsepower and lower fuel consumption. The characteristics of low speed and high torque of diesel engines are more suitable for high-load trucks.
Iveco models are mainly diesel engines.The following is relevant information about diesel: Diesel is a mixture of light petroleum products and complex hydrocarbons (about 10~22 carbon atoms) and is the fuel of diesel engines. The boiling point range and viscosity of diesel are between kerosene and lubricating oil. Flammable, insoluble in water, soluble in alcohol and other organic solvents.
Sophiem engine, Italian technology. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard. The Iveco passenger car proud series comes from the famous European style. Since its landing in China in the 1980s, it has defined China's short-head light passenger standard.
Iveco models are mainly diesel engines. There are also gasoline engine models to choose from. Most of the DMV models give Iveco yellow license plates and rarely blue license plates. The Iveco engine is in the front, but the diesel is noisy.
Hello, Iveco models are mainly diesel engines. There is also a gasoline engine. The most used is Sophia, and some special models use imported F1C. Common models are usually Sophim's. The Iveco engine is in the front, the front is short, and the diesel engine is relatively noisy.
Comprehensive customs data libraries
author: 2024-12-24 00:46How to analyze global export trends
author: 2024-12-24 00:18Industry-specific import regulation data
author: 2024-12-23 22:43International trade KPI tracking
author: 2024-12-23 23:28Trade intelligence for luxury goods
author: 2024-12-23 23:07EU HS code-based duty suspensions
author: 2024-12-23 22:55How to use data for HS code classification
author: 2024-12-23 22:33678.17MB
Check944.54MB
Check217.16MB
Check846.52MB
Check955.18MB
Check172.44MB
Check954.41MB
Check193.34MB
Check343.78MB
Check521.59MB
Check771.47MB
Check692.65MB
Check634.91MB
Check312.94MB
Check128.98MB
Check735.66MB
Check822.44MB
Check539.74MB
Check148.83MB
Check286.92MB
Check772.91MB
Check397.45MB
Check182.42MB
Check855.49MB
Check177.21MB
Check666.59MB
Check429.47MB
Check561.45MB
Check992.47MB
Check429.88MB
Check173.37MB
Check618.85MB
Check761.54MB
Check854.49MB
Check631.25MB
Check771.48MB
CheckScan to install
International trade KPI tracking to discover more
Netizen comments More
1832 HS code-based tariff calculations
2024-12-24 00:45 recommend
1569 MRO HS code checks
2024-12-24 00:31 recommend
870 Trade compliance training resources
2024-12-24 00:18 recommend
1471 Customizable trade data dashboards
2024-12-23 23:23 recommend
1215 HS code advisory for inbound compliance
2024-12-23 23:10 recommend