(4) When the car is driving, driving Smokers in the driving room or carriage are not allowed to throw cigarette butts out. When carrying combustibles, loading and unloading personnel sitting in the carriage are strictly prohibited from smoking.(5) When the car enters the place where flammable materials are stored, a fireproof cap must be worn on the exhaust pipe.
Leakage of fuel from automobile engines. The engine is composed of various parts. If it is not maintained for a long time, it will cause friction loss of each part, which will cause the engine seal to fail to meet the complete sealing standard, thus causing oil leakage and scattering to the engine line to cause corrosion. Once sparks appear, it is easy to cause a fire.
Pay attention to fire prevention when parking. When parking, pay attention to the surrounding fire safety environment, do not park in and near flammable materials, and stay away from fire sources such as firecrackers and burning paper. When parking, do not park next to weeds, pieces of paper, leaves and other combustible materials to prevent the exhaust pipe from igniting fire at high temperature.
1. (5) When the car engine cannot be started for a while, it should be carefully checked, and it should not be forced to start for a long time. Fire prevention during maintenance. ( 1) When inspecting or cleaning automobile mechanical parts, the output end of the battery must be disassembled and cut off the power to prevent the line insulation from being damaged and leaking or the maintenance equipment from touching the electrical part and causing electric sparks.
2. Before driving, the tire inflation should be checked. It should not be overloaded or weight on one side to prevent the tire from rubbing and burning. In winter, the engine, fuel tank and other parts should not be grilled with an open fire. When baking with an open fire, you should pay attention to fire prevention and take strict care of it.
3. Check the tire inflation before driving. Do not overload or overweight, so as to avoid tire friction causing heat and fire.In winter, open flames are usually not allowed to bake engines, fuel tanks and other parts. When you need to bake with an open fire, pay attention to fire prevention and pay strict attention.
S store fire protection requirements belong to the second level. At present, the construction scale of 4S stores in China, and most of the maintenance parking spaces in the maintenance workshop are larger than 2, so the fire resistance level of its buildings should not be lower than the second level.
No need. According to the engineering characteristics and fire protection requirements, the indoor fire protection system of the building is equipped with: indoor fire hydrant water supply system, automatic sprinkler fire extinguishing system, large space intelligent fire extinguishing system, gas fire extinguishing system and building fire extinguisher 5 fire extinguishing system, etc.
S stores are usually made up of multiple areasComposition, such as exhibition halls, repair shops, warehouses, etc., may also have lounges, offices and other areas. There are relatively obvious functional zonings between these areas and meet the requirements of in-building evacuation, so they are classified as general buildings.
On the one hand, according to the requirements of the "Architectural Design Fire Prevention Specification" and the "Design Fire Prevention Specification for Automobile Garages, Repair Garages and Parking Lots", automobile 4S stores should install indoor fire hydrants, fire extinguishers, emergency lights, evacuation indication signs and other basic fire-fighting facilities and equipment.
Automobile 4S stores must decorate the internal layout according to the requirements of the dealer, so they will consider more customer needs and economic benefits, often ignore the fire safety design requirements, and even privately adopt decoration, decorative materials, fireproof coatings, etc. that do not meet the fire protection requirements. Therefore, fire safety There are certain hidden dangers at the source.
1. Leakage of car engine fuel. The engine is composed of various parts. If it is not maintained for a long time, it will cause friction loss of each part, which will cause the engine seal to fail to meet the complete sealing standard, thus causing oil leakage and scattering to the engine line to cause corrosion. Once sparks appear, it is easy to cause a fire.
2. Car engine fuel leakage. The engine is composed of various parts. If it is not maintained for a long time, it will lead to friction loss of all parts, so that the engine seal cannot meet the complete sealing standard, resulting in oil leakage, and scattering to the engine pipeline and causing corrosion, which is easy to catch fire.
3. Reason 1: When the leakage engine is working, the temperature of the ignition coil is very high, which softens, ages and cracks the insulation layer of the high-voltage ignition wire. Ignite the high-voltage electrical insulation layer. It is easy to produce high-voltage electrical leakage, causing the temperature of the leakage area to rise, igniting the leaking gasoline of engines, carburetors, etc., resulting in fire. Burns.
4. Disturb the common sense of vehicle fire suppression here. In the face of the natural combustion of fuel vehicles, firefighters can use most of the digestive media (such as water, foam, dry powder, etc.) to extinguish the fire. This medium is mainly used to block oxygen for the purpose of extinguishing the garden. As the temperature of the flame disappears decreases, re-ignition rarely occurs.
5. You can pull open the lock wrench to expose a crack in the hood, and then spray the extinguishing agent into it. It can only be stopped when there is no smoke.At this time, open the hood and clean up. The fire, run away quickly.
1. Car engine fuel leakage. The engine is composed of various parts. If it is not maintained for a long time, it will lead to friction loss in various parts, so that the engine will be sealed.The ring cannot meet the complete sealing standard, resulting in oil leakage, scattered on the engine pipeline and causing corrosion, which is easy to catch fire.
2. The reason for the car fire is the fuel leakage problem of the car engine that makes you shiver! The engine has a sealing ring. If it is not well maintained, it will lead to oil leakage and even fire. Don't look ust on the items in the car! Exposure to the sun or contact with the source of fire can easily cause a fire.
3. Leakage of car engine fuel. The engine is composed of various parts. If it is not maintained for a long time, it will cause friction loss of each part, which will cause the engine seal to fail to meet the complete sealing standard, thus causing oil leakage and scattering to the engine line to cause corrosion. Once sparks appear, it is easy to cause a fire.
4. Methods to prevent automobile fires are some fire prevention of automobile electrical appliances.(1) The selection of the wire cross-section should be appropriate, and it should not be pulled and connected randomly or increase the load at will. ( 2) The electrical wiring should be installed reasonably, and should not be too close to the high-temperature surface of the car body. If it is close to the oil line or high-temperature surface, a protective cover or bandage temperature-resistant and corrosion-resistant protective materials should be added.
How to use HS codes for tariff predictions-APP, download it now, new users will receive a novice gift pack.
(4) When the car is driving, driving Smokers in the driving room or carriage are not allowed to throw cigarette butts out. When carrying combustibles, loading and unloading personnel sitting in the carriage are strictly prohibited from smoking.(5) When the car enters the place where flammable materials are stored, a fireproof cap must be worn on the exhaust pipe.
Leakage of fuel from automobile engines. The engine is composed of various parts. If it is not maintained for a long time, it will cause friction loss of each part, which will cause the engine seal to fail to meet the complete sealing standard, thus causing oil leakage and scattering to the engine line to cause corrosion. Once sparks appear, it is easy to cause a fire.
Pay attention to fire prevention when parking. When parking, pay attention to the surrounding fire safety environment, do not park in and near flammable materials, and stay away from fire sources such as firecrackers and burning paper. When parking, do not park next to weeds, pieces of paper, leaves and other combustible materials to prevent the exhaust pipe from igniting fire at high temperature.
1. (5) When the car engine cannot be started for a while, it should be carefully checked, and it should not be forced to start for a long time. Fire prevention during maintenance. ( 1) When inspecting or cleaning automobile mechanical parts, the output end of the battery must be disassembled and cut off the power to prevent the line insulation from being damaged and leaking or the maintenance equipment from touching the electrical part and causing electric sparks.
2. Before driving, the tire inflation should be checked. It should not be overloaded or weight on one side to prevent the tire from rubbing and burning. In winter, the engine, fuel tank and other parts should not be grilled with an open fire. When baking with an open fire, you should pay attention to fire prevention and take strict care of it.
3. Check the tire inflation before driving. Do not overload or overweight, so as to avoid tire friction causing heat and fire.In winter, open flames are usually not allowed to bake engines, fuel tanks and other parts. When you need to bake with an open fire, pay attention to fire prevention and pay strict attention.
S store fire protection requirements belong to the second level. At present, the construction scale of 4S stores in China, and most of the maintenance parking spaces in the maintenance workshop are larger than 2, so the fire resistance level of its buildings should not be lower than the second level.
No need. According to the engineering characteristics and fire protection requirements, the indoor fire protection system of the building is equipped with: indoor fire hydrant water supply system, automatic sprinkler fire extinguishing system, large space intelligent fire extinguishing system, gas fire extinguishing system and building fire extinguisher 5 fire extinguishing system, etc.
S stores are usually made up of multiple areasComposition, such as exhibition halls, repair shops, warehouses, etc., may also have lounges, offices and other areas. There are relatively obvious functional zonings between these areas and meet the requirements of in-building evacuation, so they are classified as general buildings.
On the one hand, according to the requirements of the "Architectural Design Fire Prevention Specification" and the "Design Fire Prevention Specification for Automobile Garages, Repair Garages and Parking Lots", automobile 4S stores should install indoor fire hydrants, fire extinguishers, emergency lights, evacuation indication signs and other basic fire-fighting facilities and equipment.
Automobile 4S stores must decorate the internal layout according to the requirements of the dealer, so they will consider more customer needs and economic benefits, often ignore the fire safety design requirements, and even privately adopt decoration, decorative materials, fireproof coatings, etc. that do not meet the fire protection requirements. Therefore, fire safety There are certain hidden dangers at the source.
1. Leakage of car engine fuel. The engine is composed of various parts. If it is not maintained for a long time, it will cause friction loss of each part, which will cause the engine seal to fail to meet the complete sealing standard, thus causing oil leakage and scattering to the engine line to cause corrosion. Once sparks appear, it is easy to cause a fire.
2. Car engine fuel leakage. The engine is composed of various parts. If it is not maintained for a long time, it will lead to friction loss of all parts, so that the engine seal cannot meet the complete sealing standard, resulting in oil leakage, and scattering to the engine pipeline and causing corrosion, which is easy to catch fire.
3. Reason 1: When the leakage engine is working, the temperature of the ignition coil is very high, which softens, ages and cracks the insulation layer of the high-voltage ignition wire. Ignite the high-voltage electrical insulation layer. It is easy to produce high-voltage electrical leakage, causing the temperature of the leakage area to rise, igniting the leaking gasoline of engines, carburetors, etc., resulting in fire. Burns.
4. Disturb the common sense of vehicle fire suppression here. In the face of the natural combustion of fuel vehicles, firefighters can use most of the digestive media (such as water, foam, dry powder, etc.) to extinguish the fire. This medium is mainly used to block oxygen for the purpose of extinguishing the garden. As the temperature of the flame disappears decreases, re-ignition rarely occurs.
5. You can pull open the lock wrench to expose a crack in the hood, and then spray the extinguishing agent into it. It can only be stopped when there is no smoke.At this time, open the hood and clean up. The fire, run away quickly.
1. Car engine fuel leakage. The engine is composed of various parts. If it is not maintained for a long time, it will lead to friction loss in various parts, so that the engine will be sealed.The ring cannot meet the complete sealing standard, resulting in oil leakage, scattered on the engine pipeline and causing corrosion, which is easy to catch fire.
2. The reason for the car fire is the fuel leakage problem of the car engine that makes you shiver! The engine has a sealing ring. If it is not well maintained, it will lead to oil leakage and even fire. Don't look ust on the items in the car! Exposure to the sun or contact with the source of fire can easily cause a fire.
3. Leakage of car engine fuel. The engine is composed of various parts. If it is not maintained for a long time, it will cause friction loss of each part, which will cause the engine seal to fail to meet the complete sealing standard, thus causing oil leakage and scattering to the engine line to cause corrosion. Once sparks appear, it is easy to cause a fire.
4. Methods to prevent automobile fires are some fire prevention of automobile electrical appliances.(1) The selection of the wire cross-section should be appropriate, and it should not be pulled and connected randomly or increase the load at will. ( 2) The electrical wiring should be installed reasonably, and should not be too close to the high-temperature surface of the car body. If it is close to the oil line or high-temperature surface, a protective cover or bandage temperature-resistant and corrosion-resistant protective materials should be added.
HS code compliance for customs
author: 2024-12-24 00:15How to benchmark import export performance
author: 2024-12-23 23:35Country tariff schedules by HS code
author: 2024-12-23 23:09Industry-specific tariff code reference
author: 2024-12-24 00:09API integration with HS code databases
author: 2024-12-23 23:14How to track competitor import export data
author: 2024-12-23 22:15HS code compliance in cross-border rail freight
author: 2024-12-23 22:13652.19MB
Check481.92MB
Check189.13MB
Check778.32MB
Check224.48MB
Check137.68MB
Check448.81MB
Check684.92MB
Check424.57MB
Check357.12MB
Check188.93MB
Check996.55MB
Check681.62MB
Check645.14MB
Check299.88MB
Check235.95MB
Check961.89MB
Check624.44MB
Check298.88MB
Check793.23MB
Check865.52MB
Check918.43MB
Check527.69MB
Check733.33MB
Check781.57MB
Check966.46MB
Check731.99MB
Check169.67MB
Check795.63MB
Check226.11MB
Check717.37MB
Check195.59MB
Check521.25MB
Check294.35MB
Check376.24MB
Check724.64MB
CheckScan to install
How to use HS codes for tariff predictions to discover more
Netizen comments More
1272 HS code mapping for infant formula imports
2024-12-24 00:40 recommend
1109 How to analyze global export trends
2024-12-23 23:20 recommend
181 Electronics global trade by HS code
2024-12-23 23:10 recommend
1465 HS code-based broker fee negotiations
2024-12-23 23:06 recommend
2576 Trade data for industrial machinery
2024-12-23 22:49 recommend